Why are the Speakers on Acer Nitro VG270 barely audible?

fidlrjiffy
fidlrjiffy Member Posts: 4 New User
edited November 15 in Monitors

I just bought an Acer Nitro VG270 to replace an Asus monitor that just stopped working and one of the reasons I got it was that it had speakers. However, the sound coming through the speakers is barely audible.

I have the volume turned up on the monitor and in Windows Audio.

I am using Windows 11 and HDMI (no audio jack) and Intel Display Audio is supposed to be driving the speakers.

I found and installed drivers for the VG270 and it made no difference.

This setup is literally the same as with the Asus; I just plugged in the power and HDMI cables.

Speakers are a must for me and hopefully this can be addressed quickly.

Thanks!

Answers

  • Axxo
    Axxo Member, Ally Posts: 925

    Hi fidlrjiffy

    Here is how I fixed the issued.

    • Open Display
    • Advance Display Setting
    • Refresh Rate

    If you change the refresh rate down from 75Hz to 60Hz then the monitor will have sound. Hope this helps. 

    ——————————————-

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful.

  • Diya1811
    Diya1811 Member Posts: 197 Mr. Fixit WiFi Icon

    @fidlrjiffy

    To fix the low sound on your Acer Nitro VG270 monitor, make sure the volume is up on both the monitor and in Windows settings. Set the monitor's speakers as the default audio device in Windows. Update your Intel Display Audio drivers. Run the Playing Audio troubleshooter in Windows settings. Enable Spatial Sound in the Sound settings. Check that your HDMI cable is securely connected and try a different HDMI port if needed.

    Click on "Yes" if it answers your question or Click on "Like" if you find my answer useful

  • fidlrjiffy
    fidlrjiffy Member Posts: 4 New User

    I appreciate the responses, tried them all, but none helped at all. In fact, I sent the monitor back and got a different brand. However, because the universe hates me, while the replacement monitor had better sound (not great) the picture was awful. I then took a chance that the VG270 issue was a one-off and got another one. Same issue…but the visually it's great. I'm stumped. My guess is that the Intel Display driver expects speakers with more power. I hate the thought of external speakers, that's so 2005, but I may go that route.

    Many thanks!

  • billsey
    billsey ACE Posts: 34,697 Trailblazer

    With the volume set at max on both the monitor and on Windows, show us the sound setting in Windows showing the output device selected…

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • ixlr8hrd
    ixlr8hrd Member Posts: 2 New User

    This worked for me on my new VG270

    1. Open Control Panel find Sound and open it.
    2. In Playback find the monitor and highlight it.
    3. Click the Properties Button.
    4. In the resulting dialog box, click the Enhancements tab.
    5. Uncheck the box "Disable all enhancements'
    6. Check the box that says Loudness Equalization.
    7. OK your way out of all of those boxes.

  • fidlrjiffy
    fidlrjiffy Member Posts: 4 New User

    Thanks for your post. However, following your steps I did not find an Enhancements tab in Monitor→Properties. However, in Settings following Sounds → All Sound Devices I did find an "Audio Enhancements" option but only under a Bluetooth Speaker that I've attached in order to get sound. The VG270, oddly, is not listed as a "speaker" but as it's own, apparently, type of device, and with the device name itself being Intel Display Audio which is the driver, at least on my computer, for sound over HDMI.

    Oddly enough, the monitor that the VG270 replaced, which also worked with audio over HDMI, the sound from the internal speaker boomed.

    Thanks, again.

  • ixlr8hrd
    ixlr8hrd Member Posts: 2 New User

    Hmmm - Not sure why I have this setting and you don't. I am hooked to my monitor using the Display Port and have a Nvidia card for sound. I attached screenshots of my settings.

  • fidlrjiffy
    fidlrjiffy Member Posts: 4 New User

    My guess is that you have different audio properties because of your NVIDIA device. The Intel Display Audio driver is controlling my video and audio and it would seem it is lacking in some areas. However, this driver is not new for me. The same driver was used for my old Asus monitor. Nothing has changed except the monitor. I do appreciate you trying to help. Thanks!