When I push the button to turn on my monitor I see the word Acer dimly.

greg_3
greg_3 Member Posts: 2 New User
edited October 7 in Monitors

When I push the button to turn on my monitor I see the word Acer dimly. As I push the on/off button the image becomes darker and finally stays on. It takes a lot of buttons pushing to get it to stay on.

[Edited the thread to add issue detail]

Answers

  • sri369
    sri369 ACE Posts: 2,814 Pathfinder

    leave the monitor on for a few minutes and see if the image becomes darker by itself. maybe this specific monitor is taking time to warm up fully.

    -----
    Karma...
    LIKE - if helpful
    ACCEPT - if helped resolve
  • billsey
    billsey ACE Posts: 34,601 Trailblazer

    The symptom where the display is dark, but the image is barely showing up, is usually due to an issue with the backlight for the display. That can be expensive to fix since the backlights are bonded to the display itself. What monitor do you have? How old is it? Are you still in warranty?

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • greg_3
    greg_3 Member Posts: 2 New User

    It is a 15 year old Acer monitor. The research I found said it could also be the inverter. But there is no way to test them-just replace it and see if it works. I am not sure where I would find one if I wanted to try it? Certainly considering a new one. Thanks for writing.

  • sri369
    sri369 ACE Posts: 2,814 Pathfinder

    15 year old… most probably a CRT or an early generation LCD - they need time to warm up.

    -----
    Karma...
    LIKE - if helpful
    ACCEPT - if helped resolve