Question regarding Acer XC1760 RAM & CPU change

C_Ranger
C_Ranger Member Posts: 3 New User
  1. is it able to change CPU from 12100 to 12400 or 12400f ?
  2. i change the RAM from 4*2 to 16*2 total 32GB working fine but on speed 2133 only how can i make it more ? my New RAM 3200

Best Answers

  • StevenGen
    StevenGen ACE Posts: 12,487 Trailblazer
    edited October 1 Answer ✓

    Your oem Aspire XC-1760 desktops Intel Core i3-12100 can be definitely upgraded to the Intel Core i5-12400F or to the top of the range i7-12700 or i7-12700F but make sure that you upgrade the last XC-1760 bios version R01-B1

    With the ram you must have bought the wrong specification CL ram or speed or one module is a 2133MT/s ram as that is the only reason why your ram would run at that 2133MT/s speed. The correct and compatible ram for the XC-1760 desktop is the DDR4-3200 • CL=22 • NON-ECC • UDIMM • 288-pin • 1.2V • 2Rx8/1Rx8 • PC4-25600 type ram and should be placed into the 288pin DIMM slots like the shown in the table below. Also there is a good upgrade reference at Crucial for the XC-1760 so look at that too. Good luck and hope this helps you out.

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍

  • billsey
    billsey ACE Posts: 34,601 Trailblazer
    Answer ✓

    Very likely the memory you bought is advertised as 3200 XMP memory. Since your system doesn't support XMP overclocking, the memory runs at it's base speed of 2133MHz. Return it and purchase the correct memory 3200MHz without XMP instead.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • billsey
    billsey ACE Posts: 34,601 Trailblazer
    Answer ✓

    As Corsair says on their website: Performance Profile XMP 2.0. That means it requires XMP overclocking to reach that speed. As you found, the base JEDEC speed for that memory is 2133MHz.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.

Answers

  • StevenGen
    StevenGen ACE Posts: 12,487 Trailblazer
    edited October 1 Answer ✓

    Your oem Aspire XC-1760 desktops Intel Core i3-12100 can be definitely upgraded to the Intel Core i5-12400F or to the top of the range i7-12700 or i7-12700F but make sure that you upgrade the last XC-1760 bios version R01-B1

    With the ram you must have bought the wrong specification CL ram or speed or one module is a 2133MT/s ram as that is the only reason why your ram would run at that 2133MT/s speed. The correct and compatible ram for the XC-1760 desktop is the DDR4-3200 • CL=22 • NON-ECC • UDIMM • 288-pin • 1.2V • 2Rx8/1Rx8 • PC4-25600 type ram and should be placed into the 288pin DIMM slots like the shown in the table below. Also there is a good upgrade reference at Crucial for the XC-1760 so look at that too. Good luck and hope this helps you out.

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍

  • billsey
    billsey ACE Posts: 34,601 Trailblazer
    Answer ✓

    Very likely the memory you bought is advertised as 3200 XMP memory. Since your system doesn't support XMP overclocking, the memory runs at it's base speed of 2133MHz. Return it and purchase the correct memory 3200MHz without XMP instead.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • C_Ranger
    C_Ranger Member Posts: 3 New User

    the RAM iam using its 3200 CL 16

    CORSAIR VENGEANCE LPX

  • billsey
    billsey ACE Posts: 34,601 Trailblazer
    Answer ✓

    As Corsair says on their website: Performance Profile XMP 2.0. That means it requires XMP overclocking to reach that speed. As you found, the base JEDEC speed for that memory is 2133MHz.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • C_Ranger
    C_Ranger Member Posts: 3 New User

    thank you so much its very helpful