Reboot and Select proper boot device Acer Aspire TC-1760

aldzter
aldzter Member Posts: 3 New User
edited September 28 in Aspire and Veriton Desktops

While installing windows,stock on 1% and then error(i don't) remember the error, then suddenly this error appears,

Things i've done, check Advanced in bios, Integrated peripherals, nvme is there, i also disable VMD controller,

nothing happens,i also tried other hard disk(SATA) and remove nvme still no luck,

Answers

  • Larryodie
    Larryodie Member Posts: 1,682 Community Aficionado WiFi Icon

    How did you clone or what software is there to boot ?

  • aldzter
    aldzter Member Posts: 3 New User

    i have a license win 10 pro, i normally used dvdrom,

  • billsey
    billsey ACE Posts: 34,246 Trailblazer

    Boot from your installer flash drive or DVD again. When it gets to the point when it asks where to install, if your drive doesn't appear, install the IRST drivers. Once your drive shows up, assuming you are doing a clean install, remove all partitions and tell it to install Windows into the unallocated space (the full drive). The install should then proceed normally. If it fails almost immediately again you might be working with a failed drive which needs to be replaced.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • aldzter
    aldzter Member Posts: 3 New User

    from starting pc when i choose boot menu, please select boot device appears,theres no way to proceed to the load drivers,i can see my hdd,nvme on the bios i even change hdd, i use 4 different hdd so i think its config problem or settings..

  • billsey
    billsey ACE Posts: 34,246 Trailblazer

    My instructions were only for the install environment. The BIOS doesn't work the same.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.