How to disable Hardware write protection in Acer Chromebook 314-3H-C5QE (magnito)

Newbie12
Newbie12 Member Posts: 4 New User
edited July 18 in Chromebooks

I tried removing battery and unscrewed all the screw seen at image still no luck. Someone help !

[Edited the thread to add model name to the title]

Best Answer

  • Newbie12
    Newbie12 Member Posts: 4 New User
    Answer ✓

    I got the solution. There's no write protection screw in mentioned model but has a jumper.

Answers

  • billsey
    billsey ACE Posts: 34,672 Trailblazer

    You don't show the full model number, so I can't look it up for you. Your full model number is usually on the same sticker as your serial number, it should look something like xx314-xxx-xxxx. If it's one of the CB314 models (could be CP314 as well) then there is a number before the H defining which generation it is. Each year they change the model number when they redesign the motherboard.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Newbie12
    Newbie12 Member Posts: 4 New User

    Sorry for the late response. My model number is Acer Chromebook 314-3H-C5QE. Manufacture date 25/09/2023

  • juliawhites
    juliawhites Member Posts: 3 New User

    To disable hardware write protection on your Acer Chromebook 314-3H-C5QE, you typically need to remove a write-protect screw on the motherboard. Check online guides specific to your model for the exact location and steps, as it varies by device.

  • Newbie12
    Newbie12 Member Posts: 4 New User
    Answer ✓

    I got the solution. There's no write protection screw in mentioned model but has a jumper.

  • Newbie12
    Newbie12 Member Posts: 4 New User
    edited July 25

    Thanks for your suggestion but I know what I am doing and I have already got the solution.

  • Schlendri
    Schlendri Member Posts: 2 New User

    Might be a little late here, but where did you find the jumper?

  • billsey
    billsey ACE Posts: 34,672 Trailblazer

    For the CB315-3H there isn't a write protect jumper per se. You disconnect the battery, connect the charger, then use ESC-Reload-Power to turn it on. It will then prompt you for a recovery flash drive.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Zakou
    Zakou Member Posts: 1 New User

    please, i have the same issue can you tell me where did you find the jumper, thank you