Need Windows XP drivers for Acer Aspire ZG5 (AOA150)

DragonRider2
DragonRider2 Member Posts: 4 New User

Hello. The official Acer page does not show any drivers for this laptop:

https://www.acer.com/us-en/support/product-support/AOA150/downloads?suggest=aoa150;0

I guess they don't support it anymore or don't have downloads available.

I have looked on the internet for other driver sources, but could not find any. Does anyone have Windows XP 32-bit drivers for this laptop? Thanks!

Best Answer

  • DragonRider2
    DragonRider2 Member Posts: 4 New User
    Answer ✓

    I found the drivers.

    This archive has a big collection of (apparently all) drivers for XP and more:

    https://web.archive.org/web/20221207000653/http%3A//driverpacks.net/driverpacks/latest

    I also created a new bootable USB drive using Rufus this time, and put my WinXP iso on it (in which I splipstreamed the STA drivers). Once XP was installed, it was just a matter of finding which drivers were for my device (not that hard, since there is a list). Eventually I decided to use a driver installer called "Snappy Driver Installer Origin".

    Thank you for your suggestions, @JackE! Using Rufus really made a difference. And while I used a different driver installer, I have you to thank for the idea!

Answers

  • JackE
    JackE ACE Posts: 44,897 Trailblazer

    If you can still access the internet with a WinXP-compatible browser, download and install iobit's DriverBooster freeware using this link for Windows XP and let it try to find compatible drivers.

    Jack E/NJ

  • DragonRider2
    DragonRider2 Member Posts: 4 New User

    Thank you for the suggestion, but the issue goes deeper than this.

    Main thing is, from what I was able to research, I actually need to "inject" the laptop's SATA drivers into a Windows XP iso. Because otherwise the Windows XP installer blue screens.

    So DriverBooster would help, but I can't install Windows XP without having access to SATA drivers. Unless DriverBooster can give me the actual driver files?

  • JackE
    JackE ACE Posts: 44,897 Trailblazer

    Did you prepare the bootable USB stick using 32-bit WinXP iso and Rufus freeware for an MBR partitioned HDD?

    Jack E/NJ

  • DragonRider2
    DragonRider2 Member Posts: 4 New User

    I used "Ventoy" to make a USB drive bootable and used a 32-bit WinXP iso. SATA drive is fully formatted and is MBR. If you're interested, I get a bluescreen and error 0x0000007B (0xF78D2524,0xC0000034,0x00000000,0x00000000) when trying to install WinXP.

    People online suggest to change AHCI to IDE in the BIOS to avoid this error, but the BIOS of this laptop does not have such an option. Which is why I'm looking for SATA drivers.

  • JackE
    JackE ACE Posts: 44,897 Trailblazer

    It should read the USB stick OK if the USB stick itself is MBR partitioned FAT32 formatted. It cannot read an MBR partitioned NTFS formatted installation stick.

    Jack E/NJ

  • DragonRider2
    DragonRider2 Member Posts: 4 New User
    Answer ✓

    I found the drivers.

    This archive has a big collection of (apparently all) drivers for XP and more:

    https://web.archive.org/web/20221207000653/http%3A//driverpacks.net/driverpacks/latest

    I also created a new bootable USB drive using Rufus this time, and put my WinXP iso on it (in which I splipstreamed the STA drivers). Once XP was installed, it was just a matter of finding which drivers were for my device (not that hard, since there is a list). Eventually I decided to use a driver installer called "Snappy Driver Installer Origin".

    Thank you for your suggestions, @JackE! Using Rufus really made a difference. And while I used a different driver installer, I have you to thank for the idea!

  • JackE
    JackE ACE Posts: 44,897 Trailblazer

    Congrats. Thanks for reporting back. 🙂

    Jack E/NJ