Acer Extensa 5630 wont turn on after upgrading the processor
I need help to diagnose my laptop issue
Recently I upgraded the processor on Acer Extensa 5630 from Intel P8400 3M 1066 FBS to T9600 2.80 GHz 6M .The Motherboard rejected the processor and the PC restarted several time until I forced to turned off by pressing power button. This device compatible with FBS 800 and 1066 ..the P8400 2.26 GHz 3MB 1066 FBS was installed on this laptop without any problem and i tried to upgrade it with same FBS processor but not worked.
however after restoring the P8400 the laptop wont turn on at all completely dead like cold stone. i disassembled the laptop fully and cleared the cmos by taking the battery out..and even changed the ram but not succeededI did comparison on intel website between the two the processors , i think the T9600 should works although I still doubt it is corrupted and the problem in the processor not in the motherboard .. if P8400 with same FBS wokred..T9600 should work either..i even checked the chipset ..its compatible with 800 and 1066 FBS and ram 667 , 800MHZ
What are the chances of this laptop malfunctions? is it possible that the mainboard or bios burned out or there any circuit shorted? i dont know !!?