EK240Y how to remove stand angle.It could be removed?

josean_camper
josean_camper Member Posts: 3 New User
edited November 2023 in Monitors

Hi. I need to remove the stand angle from this monitor. It could be removed? Thanks.

[Edited the thread to add issue detail]

Best Answers

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,292 Pathfinder
    Answer ✓

    @josean_camper

    That part might be on there tight, and there is no way to take it out without disassembling the back cover.

    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • billsey
    billsey ACE Posts: 34,228 Trailblazer
    Answer ✓

    I believe on those models you have to remove the back cover, which gives access to the swivel portion. That's held in place by two screws:

    image.png

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.

Answers

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,292 Pathfinder
    edited November 2023

    @josean_camper

    You can use a screwdriver to push the latch to remove the stand.

    image.png

    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • josean_camper
    josean_camper Member Posts: 3 New User

    I saw this before ask, but the problem is on the part that supports the base:

    7921d592-ad2c-4cd1-97ff-74118d3cf8d3.jpg

    Thanks so much.

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,292 Pathfinder
    Answer ✓

    @josean_camper

    That part might be on there tight, and there is no way to take it out without disassembling the back cover.

    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • billsey
    billsey ACE Posts: 34,228 Trailblazer
    Answer ✓

    I believe on those models you have to remove the back cover, which gives access to the swivel portion. That's held in place by two screws:

    image.png

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • josean_camper
    josean_camper Member Posts: 3 New User

     @AnhEZ28 @billsey Thanks so much for your answer, I imagined that was the option, but I was hoping for some magic trick... but no.😅

    Gracias señores.

Categories