Iconia One 8 After factory reset, erase icon cycles continuously.

KentClark
KentClark Member Posts: 7 New User
edited October 2023 in Tablets

After factory reset, erase icon cycles continuously. Tried Power and Volume buttons and now have message Entering Dnx mode, waiting for fast boot command. Then nothing. Any suggestions?

[Edited the thread to add issue detail]

Answers

  • JimboTheWindowsFreak
    JimboTheWindowsFreak Member Posts: 67 Devotee WiFi Icon

    Try reinstalling. Also what are your plans for this machine?

  • KentClark
    KentClark Member Posts: 7 New User

    Cannot get passed the erase icon cycling. Other, using pwr and vol buttons, message "entering Dnx mode, waiting for fast boot command" then nothing. Cannot proceed. Plans for the unit - throw against the wall.

  • billsey
    billsey ACE Posts: 34,206 Trailblazer

    Which Iconia One 8 model is it? If old enough it is possible the drive has failed…

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • KentClark
    KentClark Member Posts: 7 New User

    Thanks for answering. Unable to do anything while erase icon is cycling (for days). Tried Volume and Power buttons simultainiously, when power up, release power button. Message "Going into Dnx mode, awaiting fast boot command. Then nothing. No matter what I hit, no change until it reverts back to cycling erase icon.

  • billsey
    billsey ACE Posts: 34,206 Trailblazer

    Sure sounds like the drive has died… No real fix for that, I'm afraid. :(

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.

Categories