XV275KP3 Vesa mounting ? how can i mount it on the wall ?

Aurel81
Aurel81 Member Posts: 8

Tinkerer

edited October 2023 in Monitors

Hello, i just got the last month released monitort, but how the hell can i mount it on the wall ?
Just remove those 4 screws and use some spacers to even it out ?
Thxia ;-)

[Edited the thread to add issue detail]

Answers

  • billsey
    billsey ACE Posts: 34,601 Trailblazer

    Those four screws. There should have been some standoff screws in the box that are used to allow a VESA mount to fit, by bringing the screw base out far enough so the mount doesn't have to fit into the hole.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Aurel81
    Aurel81 Member Posts: 8

    Tinkerer

    sadly, there are not standoff screws or spacer in the box… i will have to get them somewhere else, but thx for your reply mate

  • billsey
    billsey ACE Posts: 34,601 Trailblazer

    You should be able to find them at most decent hardware stores, or online. Just pull one of the four out so you can see if it's an M4 or M5 and how long it is, then pick up four standoffs that give a half inch or inch extra depth in the same screw size.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.