How to boot through usb in veriton X2630g ?

adyyy
adyyy Member Posts: 12 New User

My windows 10 software is corrupt in the PC so I tried to boot it.I've try manytimes to boot the Computer but it's not recognizing the Bootable USB. How can I boot the Acer Veriton X2630G window 10(64bit)

Best Answer

  • Larryodie
    Larryodie Member Posts: 1,744 Community Aficionado WiFi Icon
    Answer ✓

    Hmmm, I don't think that you should be in legacy mode but let an expert verify.

Answers

  • themero
    themero Member Posts: 49 Devotee WiFi Icon

    ry and put windows 10 on another drive and give that a go. Also are you sure the drive your using at the minute isn't corrupted , have you tried it on another pc ?

  • Larryodie
    Larryodie Member Posts: 1,744 Community Aficionado WiFi Icon
    edited September 2023

    Be sure that you have Boot Enable is ENABLED in bios and then reboot using F12 to select your USB. That should show in the F12 menu if it don't show then redo the USB.

    https://support.microsoft.com/en-us/windows/create-installation-media-for-windows-99a58364-8c02-206f-aa6f-40c3b507420d

  • adyyy
    adyyy Member Posts: 12 New User

    Thanks for your answers the usb is working in another laptop I've tried many times to boot but it's not recognizing the usb.

  • Larryodie
    Larryodie Member Posts: 1,744 Community Aficionado WiFi Icon

    Your F12 boot should provide this screen.

  • Larryodie
    Larryodie Member Posts: 1,744 Community Aficionado WiFi Icon
    Answer ✓

    Hmmm, I don't think that you should be in legacy mode but let an expert verify.

  • adyyy
    adyyy Member Posts: 12 New User

    But's not showing like that please help me please how to get those options.

  • Try configuring the USB drive, through Power Shell as administrator, by typing these commands:
    diskpart
    list disk
    sel disk x
    clean
    convert gpt
    create partition primary
    format fs=fat32 quick
    assign

    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • adyyy
    adyyy Member Posts: 12 New User

    How can I go to Legacy to UEFI mode, it's not getting the Boot manager or recognizing the usb.

  • Larryodie
    Larryodie Member Posts: 1,744 Community Aficionado WiFi Icon

    Did you let MS create your drive as it will be bootable but I don't think that it will be Legacy bootable. I don't know how to change but create your disk here.

    You say that it boots from a laptop. Is it Legacy or UEFI ?

    https://support.microsoft.com/en-us/windows/create-installation-media-for-windows-99a58364-8c02-206f-aa6f-40c3b507420d

  • adyyy
    adyyy Member Posts: 12 New User

    It's change into UEFI mode and it's shows the boot manager and usb But in my case the Boot manager is showing and the legacy mode is not Changing into UEFI mode

  • Larryodie
    Larryodie Member Posts: 1,744 Community Aficionado WiFi Icon
    edited September 2023

    I would try a F9 to load them default bios.

    Save your changes and reboot.

    If that doesn't work try changing the Launch CSM Always to never and save changes BUT 1st read this post.

  • billsey
    billsey ACE Posts: 34,624 Trailblazer

    I answered on one of the other threads, but the computer likely doesn't support UEFI and needs an MBR boot environment.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Larryodie
    Larryodie Member Posts: 1,744 Community Aficionado WiFi Icon

    Per this link, you can create a DVD with the Win10 image.

    https://www.microsoft.com/en-us/software-download/windows10

  • adyyy
    adyyy Member Posts: 12 New User
    edited September 2023

    How can I boot it guys any idea?

  • Larryodie
    Larryodie Member Posts: 1,744 Community Aficionado WiFi Icon

    Burn a DVD on your other computer then boot the DVD.

    https://www.microsoft.com/en-us/software-download/windows10