How do I fix the microphone port the bezel around it is broken

Lycronicals1_
Lycronicals1_ Member Posts: 4 New User
edited June 2023 in Predator Desktops
PXL_20230618_100259247.jpg

The microphone port works but the bezel around it is broken I was wondering how I could get it fixed

[Edited the thread to add issue detail]

Answers

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,297 Pathfinder

    @Lycronicals1_ the only way to replace that port is to desolder it and replace it with a new one. If you don't know soldering, take it to a pc repair shop or electronics store that knows soldering.

    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • Lycronicals1_
    Lycronicals1_ Member Posts: 4 New User

    Thank you I thought I'd have to replace the entire motherboard

  • billsey
    billsey ACE Posts: 34,246 Trailblazer

    It depends on the model you have. Most of the PO3 models do have that port soldered to the motherboard, most the PO5 and PO7 models do not. Earlier Predator models might or might not, and the same with the Nitro desktops. Your full model number is usually on the same sticker as your serial number, it should look something like xxxxx-xxx-xxxx.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.

Categories