Acer Predator XB240H Connection Options I would be able to use 144hz

fuvjbk
fuvjbk Member Posts: 14

Tinkerer

edited May 2023 in Predator Monitors

Hi all,

I recently purchased an Acer Predator XB240H gaming monitor and have had trouble accessing the 144hz functionality. So far I have been using a cable with two HDMI ports, and I was wondering if I got a DisplayPort adapter for one side of the cable I would be able to use 144hz? I would buy a cable with two DP ports but my gaming laptop only has HDMI and C-Port options. Please let me know what my options are and if my above suggestion would work in achieving 144hz.

Thanks in advance,

EJ

[Edited the thread to add issue detail]

Best Answer

«1

Answers

  • fuvjbk
    fuvjbk Member Posts: 14

    Tinkerer

    In case it's needed, I have an NVIDIA GPU.

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,248 Pathfinder
    edited May 2023

    is the maximum refresh rate you currently have is 120Hz or something else? Did you try to create a custom resolution in Nvidia Control Panel?

    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • fuvjbk
    fuvjbk Member Posts: 14

    Tinkerer

    Currently I am on 75Hz as that's the highest that I was able to go through the NVIDIA Control Panel. When going any higher, the error message I get is 'input not supported'.

  • billsey
    billsey ACE Posts: 33,998 Trailblazer

    What laptop do you have? Which version of HDMI does it support? An HDMI to DP cable won't give you any more functionality than the HDMI cable itself gives you, and it's likely gated by the laptop.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • fuvjbk
    fuvjbk Member Posts: 14

    Tinkerer

    I have a Dell G15 Ryzen edition, and I’m not too sure what version of HDMI it supports although it’s a very new model so I’d assume the newest one. Rather than a HDMI to DSP cable (which I’ve already tried only for no input detected), I thought I’d get a male HDMI to female DSP adapter to make my laptop the DSP output, as far as I know DSP —> HDMI is not a bidirectional connection.

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,248 Pathfinder

    @fuvjbk so it only works up to 75Hz with the HDMI to HDMI cable?

    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • fuvjbk
    fuvjbk Member Posts: 14

    Tinkerer

    Yes, 75Hz is currently the maximum. If I use the same HDMI to HDMI cable and make my laptop a DisplayPort output using an adapter, would I be able to display 144Hz then?

  • billsey
    billsey ACE Posts: 33,998 Trailblazer

    So Dell specs say your laptop has an RTX 3060 in it and the HDMI port is 2.1, It should handle those frequencies without an issue. Your XB240H however is eight years old and these are the specs:

    So HDMI maxes out at 76Hz, to get 144Hz you need DP to DP or DVI to DVI. I'm not sure which XB240H model you have, which ports are populated on it? There should be some subset of VGA, DVI, HDMI and DP.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • fuvjbk
    fuvjbk Member Posts: 14

    Tinkerer

    I have a HDMI port, a DVI port, a VGA port and a DisplayPort. I think it’s the 2014 or 15 model? I also have an RTX 3050 in my laptop, not a 3060 if that makes any difference.

  • billsey
    billsey ACE Posts: 33,998 Trailblazer

    So to get the higher frequencies you are going to need to connect using either DVI or DP, and with the laptop it doesn't have a DVI port. Use the DP from the laptop to get the higher refresh rates.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • fuvjbk
    fuvjbk Member Posts: 14

    Tinkerer

    I bought a DVI to DVI cable and a HDMI male to DVI female adaptor for my laptop. Should this work? I do not have a DisplayPort port on my laptop.

  • fuvjbk
    fuvjbk Member Posts: 14

    Tinkerer

    As it turns out, the DVI to DVI cable (with the adapter) did not work, as I must not have gotten a DVI-D Dual-Link cable in particular. Before I explore other options, would a C-Port to DisplayPort cable display 144Hz? If it works I could also purchase a HDMI male to DSP female adapter and then a DSP to DSP cable, but would much rather purchase just one C-Port to DSP cable if it works as they're a lot cheaper.

  • fuvjbk
    fuvjbk Member Posts: 14

    Tinkerer

    Before I explore other options, would a C-Port to DisplayPort cable display 144Hz? If it works I could also purchase a HDMI male to DSP female adapter and then a DSP to DSP cable, but would much rather purchase just one C-Port to DSP cable if it works as they're a lot cheaper.

  • billsey
    billsey ACE Posts: 33,998 Trailblazer

    No, anything that goes through HDMI at either end will only provide the HDMI levels.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • fuvjbk
    fuvjbk Member Posts: 14

    Tinkerer

    So would C-Port to DisplayPort work? If not, what are my other options? My laptop only has HDMI and USB-C outputs.

  • billsey
    billsey ACE Posts: 33,998 Trailblazer

    It depends on the DP version your laptop can send over the USB-C port. If it's a high enough version then you should get the full 144Hz using a USB-C to DP cable connected to the DP port on the monitor.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • fuvjbk
    fuvjbk Member Posts: 14

    Tinkerer

    These are the specs for my processor. As the DisplayPort version is 2 and USB Type-C DisplayPort Alternate Mode is supported, the USB-C to DP cable should work, right?

  • fuvjbk
    fuvjbk Member Posts: 14

    Tinkerer

    Is there anyway for me to use the HDMI port on my laptop, whether it’s through adapters and/or special cables and still achieve 144hz on the monitor? I think the USB-C port on my laptop only utilises the integrated graphics available on my computer, which will not suffice for optimal performance.

  • fuvjbk
    fuvjbk Member Posts: 14

    Tinkerer

    Does DisplayPort version matter for this monitor or should it support 1.4? Just curious as it is an older model.

  • billsey
    billsey ACE Posts: 33,998 Trailblazer

    No, the HDMI port has builtin limitations, and those are carried through whatever adapters you have on it. The monitor should have specs for what resolutions and frequencies it supports.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.