Sense issue (PO3-640) after downgrading (W11 > W10) I want to disable the case/fan lights.

sarahhell
sarahhell Member Posts: 4 New User
edited April 2023 in Predator Desktops

hi,

i recently did a clean install with Windows 10 straight when I got the machine. I tried to run Sense downloaded from offical Acer support page ( https://www.acer.com/gb-en/support?search=DGE2WEG01822803D189600;DG.E2WEG.018;PO3-640&filter=global_download

Event though it says Windows11…

The app starts, as the service and executables are running, but no UI ever shows up. And I tried other solutions found on this forums and in the web already (like rebuild perfindexs, running the app from the folder as admin)

Doesn't seem to work, acer arc does work btw.

Basicly, all I want to disable the case/fan lights. That's all. I need Pc to work with, not a fckn disco

[Edited the thread to add issue detail]

Best Answer

  • billsey
    billsey ACE Posts: 34,601 Trailblazer
    Answer ✓

    That should get you enough info…

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.

Answers

  • Alejandro_AC
    Alejandro_AC ACE Posts: 13,381 Trailblazer

    Hi @sarahhell the equipment is not designed to work with Windows 10, for this reason the drivers may not work correctly or may cause problems, the same happens with Acer applications, they may not work as is the case with Sense.
    What is the reason why I downgrade Windows?

    Thank you for participating in the Acer community.
    All the best.

    • Haga clic en "Me gusta" si mi respuesta fue útil o márquela como solución si se resolvió, ¡gracias!
    • Colaborador pro bono, no trabajo ni hablo en nombre de Acer
    • Please click "Like" if my answer was helpful or mark it as solution if it was solved, thanks!
    • Pro bono contributor, I do not work or speak on behalf of Acer
    • MVP de MSFT (2003-21) & Windows Insider & (alezmvp)
  • billsey
    billsey ACE Posts: 34,601 Trailblazer

    Yes, PredatorSense does some really low level stuff, and that would likely break if tried with an unsupported OS like W10.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • patriot2
    patriot2 Member Posts: 5

    Tinkerer

    edited April 2023

    Well i have a similar PC model and i also downgraded from WIN11 to WIN10 bacause i could not stand WIN11,i installed the Predator Sense for WIN11 from the downloads page and it works just fine for me.

  • sarahhell
    sarahhell Member Posts: 4 New User

    thanks for response, I downgraded due to software compatibility issues.

    I just wanted to ask if someone has Idea. Like I said, the only reason is to turn of the case lights.
    And as far as I know the sense software would be the most comfortable way.

    Guess there are bypasses, such as registry entries or config files.
    But that would require deep knowledge I guess, I could try to figure it out by myself, if the day comes where I can find the time for it.

    Unless someone has an idea

  • patriot2
    patriot2 Member Posts: 5

    Tinkerer

    You could just simply take off the side panel and pull out the correct plug on the motherboard that serves the case lights.

  • sarahhell
    sarahhell Member Posts: 4 New User

    Oh, I haven't expected it to be a dedicated plug for lights. Would also do.
    You know if it's only one plug for everything?

  • billsey
    billsey ACE Posts: 34,601 Trailblazer
    Answer ✓

    That should get you enough info…

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • patriot2
    patriot2 Member Posts: 5

    Tinkerer

    edited April 2023

    Not sure if these plugs in the photo also provide the power for the fans as well as for the lights!

  • billsey
    billsey ACE Posts: 34,601 Trailblazer

    Nope, those are just for the lights.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • sarahhell
    sarahhell Member Posts: 4 New User

    Better late than never…

    Thanks a bunch, I'll try when I have some time to spare.