Acer Predator stuck at 100 celcius in PredatorSense Predator P03-600

BadPierce77
BadPierce77 Member Posts: 3 New User
This discussion was created from comments split from: Acer Predator stuck at 100 celcius in PredatorSense.

Best Answer

  • BadPierce77
    BadPierce77 Member Posts: 3 New User
    Answer ✓

    Hey guys, 1 hour 30 minutes later,

    ~~~~~ Solution for Predator PO3-600 ~~~~~

    Here's what I did:
    • install new NVIDIA GPU update -> restart -> not solved
    • install pending Windows 11 cumulative update -> reboot -> not solved
    • shut down -> reboot -> not solved
    • install Acer Care Center -> check for BIOS updates -> no update found -> uninstall Acer Care Center -> not solved
    • uninstall Predator Sense -> shut down -> reboot -> fans are back to normal speed levels -> solved (??)
    • install Predator Sense 3.00.3014 from Acer Drivers website -> start Predator Sense -> temperature readings are back to normal -> solved (??)
    • shut down -> reboot -> everything is fine -> PROBLEM SOLVED!! YAY! :D

Answers

  • BadPierce77
    BadPierce77 Member Posts: 3 New User

    I have the same issue. It just started today 2023-03-14. Yesterday everything was fine. I also have Predator PO3-600.

    This needs to stop. Will keep you posted if I find any solution.

  • BadPierce77
    BadPierce77 Member Posts: 3 New User
    Answer ✓

    Hey guys, 1 hour 30 minutes later,

    ~~~~~ Solution for Predator PO3-600 ~~~~~

    Here's what I did:
    • install new NVIDIA GPU update -> restart -> not solved
    • install pending Windows 11 cumulative update -> reboot -> not solved
    • shut down -> reboot -> not solved
    • install Acer Care Center -> check for BIOS updates -> no update found -> uninstall Acer Care Center -> not solved
    • uninstall Predator Sense -> shut down -> reboot -> fans are back to normal speed levels -> solved (??)
    • install Predator Sense 3.00.3014 from Acer Drivers website -> start Predator Sense -> temperature readings are back to normal -> solved (??)
    • shut down -> reboot -> everything is fine -> PROBLEM SOLVED!! YAY! :D