Can't connect SATA cable to my A515-51-523X motherboard

Cinna
Cinna Member Posts: 5

Tinkerer

Hello, I'm trying to add an additional SSD drive to my A515-51-523X, but it didn't come with the SATA cable or bracket to add an additional one. It looks like there is a port on the motherboard to connect the SATA cable. I bought a bracket and cable that's supposed to be for my computer model, but I can't get the cable to connect to the motherboard port. I don't know if it's the wrong cable or if I'm just trying to connect it wrong. When I try to connect the cable, it doesn't "click" into the port. Also, there doesn't seem to be anywhere to screw in the bracket.

Any help would be appreciated. Thanks!


Answers

  • Balatekie
    Balatekie ACE Posts: 1,353 Pioneer

    Hello!!

    @Cinna,

    Below is the Storage specification for A515-51.

    As per the above info, you need not to open whole chassis of laptop. At the base it has HDD compartment. Just open it and you should be able to find cable to connect HDD\SSHD.

    Hope this information helps you.

    Regards,

    Balatekie

     :) If you think I've answered your question, please hit the Accept Answer:)

  • Cinna
    Cinna Member Posts: 5

    Tinkerer

    Hello @Balatekie

    Thank you for your comment. Unfortunately, there is no cable to connect to the HDD/SSD.

  • Cinna
    Cinna Member Posts: 5

    Tinkerer

    @Leostat

    Yeah, it doesn't clip down.

  • StevenGen
    StevenGen ACE Posts: 12,065 Trailblazer
    edited January 2023

    These are all the parts that you need to attach an additional 2.5" HDD or SSD drive to the A515-51 empty space, you need a SATA cable (don't get any other cable except this, as it will not work) you also need the HDD Bracket, 4x HDD bracket securing screws and 4x Bracket to laptop base securing screws as I've detailed below. and make sure that you get this exact Acer part numbers that I've detailed below, especially with the cable and screws, as the screws are different sizes.

    4x Bracket screws that secures the bracket to the laptop base

    4x HDD Screws to secure 2.5" HDD to the HDD bracket


  • Leostat
    Leostat ACE Posts: 3,043 Pathfinder

    Do you have a tape to compare the dimensions? Its hard to tell from the photos :D , sometimes you have to push a bit harder than it feelsyou should

  • Cinna
    Cinna Member Posts: 5

    Tinkerer

    @StevenGen

    Thank you for your information. I ordered another cable with the part number you provided, and it looks identical to the cable I already had. For this type off connection, should I just be able to click the cable into the port on the motherboard, or is there some sort of trick to it?

  • Leostat
    Leostat ACE Posts: 3,043 Pathfinder

    It just kind of pops on like a little lego brick , they cam be a bit stiff though

  • Cinna
    Cinna Member Posts: 5

    Tinkerer

    ***UPDATE***

    Finally figured it out! To connect the cable to the motherboard, I had to press down on one side first until hearing a small click, then repeat on the other side.

    The bracket didn't work as there was nowhere to screw it in place, but the laptop cover had some green foam material that lines up over where the drive goes, and it seems to be pushing down and holding the drive in place without a bracket.

  • Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :)