NitroSense Custom Fan settings is there a way to set speed of laptop fan or at least change curve?

Sayaka1
Sayaka1 Member Posts: 3 New User
edited February 2023 in Nitro Gaming
whenever i set a custom fan settings the laptop always ignores it, is there a way to set speed of laptop fan or at least change fan curve?
[Edited the thread to add the issue detail]

Answers

  • JackE
    JackE ACE Posts: 44,868 Trailblazer
    Go to this link https://www.acer.com/ac/en/US/content/drivers  enter your full model number and download/install the latest nitrosense app Jack E/NJ


    Jack E/NJ

  • Sayaka1
    Sayaka1 Member Posts: 3 New User
    I actually already have the newest version, i still tried reinstalling but its still ignoring custom settings
  • JackE
    JackE ACE Posts: 44,868 Trailblazer
    What is your full model number AN515-xx? Jack E/NJ

    Jack E/NJ

  • andylb
    andylb ACE Posts: 3,827 Pathfinder
    Make sure you have the Acer Care Center App and Nitrosense App downloaded. go to the Control Panel and Uninstall both and restart. Reinstall both Apps and restart again. Let us know

    Please click YES if I answered your question

    I am not an ACER employee
    Thank you and have a blessed day  B)

    ★★ ACE Pathfinder 2019★★

  • NOSboi
    NOSboi Member Posts: 1 New User
    Try setting the fans to a higher speed and wait for it to speed up, if it does speed up then you should be fine

    What I found out is that Nitrosense doesn't quite allow you to set the fan speed lower than the Auto speed at said temperatures

    So if your CPU or GPU is hotter than 80℃ then it won't go any lower than about 5000 rpm
    Once it cools down THEN it will get to a lower rpm 
  • cypherpunk
    cypherpunk Member Posts: 2 New User

    After hours of searching and testing.. this is the only app I found that gave me some control.
    My model is AN515-43.

    Notebook Fan Control:
    https://github.com/hirschmann/nbfc/releases
    Nitro config file: https://github.com/hirschmann/nbfc/files/6144157/Acer.Nitro.5.Nv.zip

    I set my target fan speed to about 34%. It does ramp up automatically
    when it gets hotter. Sometimes I'll switch between read-only mode and
    enabled when fans are unnecessarily noisy.