Nitro 5 questions

Hi everyone just have a few quick questions. I'm getting a Nitro 5 laptop (11400H, 3050ti model)

It's suppose to come with 16GB memory. That would be a single stick in single channel correct? From what I've read it comes with 2666mhz memory but was wondering if anyone knows if it'll handle 3200mhz memory as well? I know the 11400H can handle it but so far everything I've seen says only 2666mhz..

I also know there's a spot for a 2.5 ssd and was wondering if it comes with what you need to install one or if theres something else I'd need to get?

Finally, I also know there's an additional space for a m.2 drive. Is the second slot gen 3 or 4? I'm planning on adding a 2nd m.2 and a 2.5 drive and want to make sure I have everything ready when it arrives.

Thanks everyone!

Accepted answers

Commodore_1995#

This model comes with two 8gb RAM modules and works in dual channel: https://www.acer.com/datasheets/2021/4876/AN515-57/NH.QESAA.002.html

About the sata cable and the hard disk support, you have to ask the supplier. But I think it comes with the laptop:

M 2.0 x 4.0 1.8~2.2kgf.cm 4

FFC CABLE FOR HDD 50.QC2N2.001

HDD BRACKET 33.Q7LN2.001

About the ssd, the configuration may vary depending on the video card model:

All comments

Commodore_1995#

What is the exact model? Example AN515-55-5890.

https://community.acer.com/en/discussion/comment/1146851#Comment_1146851

I'm sorry thought I included that. My bad.

AN515-57-5700

Commodore_1995#

This model comes with two 8gb RAM modules and works in dual channel: https://www.acer.com/datasheets/2021/4876/AN515-57/NH.QESAA.002.html

About the sata cable and the hard disk support, you have to ask the supplier. But I think it comes with the laptop:

M 2.0 x 4.0 1.8~2.2kgf.cm 4

FFC CABLE FOR HDD 50.QC2N2.001

HDD BRACKET 33.Q7LN2.001

About the ssd, the configuration may vary depending on the video card model:

Thank you! Appreciate you taking the time to help me out!

Quick Links

Top Members

Weekly

RenanVilela 100