Can Noctua NH U12A fit in a Acer Predator PO3-620?

BanSoda
BanSoda Member Posts: 15 Troubleshooter
So I need better cooling in my pc, and my case doesn't have any place for extra fans.
So I have decided to upgrade my cpu fan, since the cpu gets very hot, especially in the summer. So I have decided on getting the Noctua NH-U12A.
So I measured the height from the motherboard and side panel and that height is good, it's the width I'm worried about. The stock coolers width in my pc right now is about 10cm or 3,9 inches and the noctua one is 125mm or 4,9 inches. But I also checked the U12s and it had the same width as the u12a which suprised me.
I don't really know if it will fit, since it's a few centermeters larger than the strock fan. I would really want the horsepower that the U12A has.

Answers

  • GotBanned
    GotBanned Member Posts: 654 Seasoned Specialist WiFi Icon
    If you visit Noctua's website, as I am sure you already have, you'll find very detailed information about their various products. My suggestion is to make a very basic cardboard model of NH-U12A and see whether it fits or not.

    If the cooler fits, please do not forget to report back.
  • sfanucchi88
    sfanucchi88 Member Posts: 19 Troubleshooter
    Just use the Noctua U9S like most others do. it fits perfectly and provides much better cooling. There are a ton of posts on here that recommend the U9S and show how to install it. 
  • sfanucchi88
    sfanucchi88 Member Posts: 19 Troubleshooter
    Here is mine with the U9S