Upgrade 144Mhz for a Nitro AN515-43 display

KAMEL85
KAMEL85 Member Posts: 5

Tinkerer

I have a Nitro 5-AN515-43-R5W3 from 2020y. with 60Mhz display.I wanna upgrade to 144Mhz.Can somebody help me to find appropriate display ?Majority of 144Mhz displays have 40pin connector :|

Answers

  • Valknut9200
    Valknut9200 Member Posts: 2 New User
    Hi ,
    try with this https://www.youtube.com/watch?v=c4rw8yNbfSo&ab_channel=AshBuilt , there are also links to buy display .
    Best Regards
  • StevenGen
    StevenGen ACE Posts: 12,169 Trailblazer
    edited June 2022
    KAMEL85 said:
    I have a Nitro 5-AN515-43-R5W3 from 2020y. with 60Mhz display.I wanna upgrade to 144Mhz.Can somebody help me to find appropriate display ?Majority of 144Mhz displays have 40pin connector :| 
    Just as additional info for you, do what the above video guide tell you to do but and plus, use the below Acer screen model numbers as they are 144Hz refresher rate screens that will fit your AN515-43 model laptop. Here is a place where you can buy them from "Acer NITRO 5 AN515-43-R00B Replacement LCD screen from $79.99" good luck and hope this helps you out. You need a 40pin plug only for this 144Hz screen, so check your OEM AN515-43's screen plug and its pins, if its not then change the cable/pin plug to a 40pin setup as its shown in the video guide.

    Panel Resolution - Refresh Rate (Hz) - ABO Part Number
    1920x1080          -         144             -      KL.15608.041
    1920x1080          -         144             -      KL.1560E.016
     
  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,292 Pathfinder
    @KAMEL85 your LCD cable link is the 30 PIN as mentioned in its description. You can find another one with the part number 50.q5an2.009 or ask that seller if that cable is 30pin or 40pin 
    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • KAMEL85
    KAMEL85 Member Posts: 5

    Tinkerer

    edited June 2022
    AnhEZ28 said:
    @KAMEL85 your LCD cable link is the 30 PIN as mentioned in its description. You can find another one with the part number 50.q5an2.009 or ask that seller if that cable is 30pin or 40pin 
    I agree with you, but if you look at the picture, there's 40pin. I think the description must have mistake, because any 30 PIN doesn't support 144mhz screen. I will message him.

  • KAMEL85
    KAMEL85 Member Posts: 5

    Tinkerer

    StevenGen said:
    KAMEL85 said:
    I have a Nitro 5-AN515-43-R5W3 from 2020y. with 60Mhz display.I wanna upgrade to 144Mhz.Can somebody help me to find appropriate display ?Majority of 144Mhz displays have 40pin connector :| 
    Just as additional info for you, do what the above video guide tell you to do but and plus, use the below Acer screen model numbers as they are 144Hz refresher rate screens that will fit your AN515-43 model laptop. Here is a place where you can buy them from "Acer NITRO 5 AN515-43-R00B Replacement LCD screen from $79.99" good luck and hope this helps you out. You need a 40pin plug only for this 144Hz screen, so check your OEM AN515-43's screen plug and its pins, if its not then change the cable/pin plug to a 40pin setup as its shown in the video guide.

    Panel Resolution - Refresh Rate (Hz) - ABO Part Number
    1920x1080          -         144             -      KL.15608.041
    1920x1080          -         144             -      KL.1560E.016
     
    Hi,
    Thanks Steven.I'm lookig for a parts only in Uk .
    Screen- https://www.panelook.com/modelcompare.php?ids=37089,30192
    Flex lcd - https://www.ebay.co.uk/itm/225000350341
    I presume this is what I need.
  • KAMEL85
    KAMEL85 Member Posts: 5

    Tinkerer

    Good News!!!!! Task completed 😎👍All works perfect!! Thank you for advice guys 😎
  • husulu
    husulu Member Posts: 2 New User

    Hello. Have you experienced any issues after changing the panel? Could you share your experiences on this topic?