Monitor black but backlit, can't get it off the wall, can't get model/SNID

Arrold
Arrold Member Posts: 7

Tinkerer

Hi, I'm in the UK.
I bought a monitor a few years ago, maybe 2017/18 but can't remember exactly, I've tried looking back through emails but can't find anything and can't remember where I bought it.

I think it's a 32" 1440p monitor, there's no speakers on it, it has a white back and sides, black bezels around the screen itself, a single HDMI input and a couple of other ports (DVI? and something else) on one side of the kinda back housing thing and a kettle lead style power port on the other side.
There are 5 small curved buttons on the bottom, a power button and 4 other buttons.
It used to have these little ribbons that you pull down to release it from the wall mounted bracket, but the ribbons have long since disintegrated.

It came with us when we moved house in 2019 and I wall mounted it behind my desk.
Yesterday it went black, I was using it at the time, all was fine then it just didn't display anything. It's being backlit because you can see the colour changing when you power it on, the laptop also recognises it because you can drag things into the empty blackness but there's nothing on the screen, I can't get any settings up either, you know, the monitor settings you bring up with the buttons on the bottom.
Previously when you powered it on you it would display something that indicated it was searching the various inputs for a signal, I don't get that any more.

I've tried taking pictures/video of the plate on the back with the model details etc but I can't get far enough away to get a focussed picture, they're all too blurry apart from I think the model Number starts with an E and at the top of the plate it says "LCD Monitor".

I've tried swapping power leads.
I've tried unplugging the power and holding the power button for 30 seconds then powering it back on.
I seriously doubt this is HDMI related given that it's not displaying anything prior to aquiring a signal but I tried a different cable from a different feed anyway.

I would be good if I could get it working again but firstly, I think I need to try and get it off the wall, once I get to that point I can either raise something with Acer and/or replace it when that can be afforded.

i've tried calling Acer but couldn't figure out how to get through without an SNID.
Any help would be appreciated, thanks

Answers

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,490 Pathfinder
    @Arrold check if you still have the box to get the SNID or might have to take it off the wall to reveal the SN.
    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • Arrold
    Arrold Member Posts: 7

    Tinkerer

    @AnhEZ28 I don't have the box
  • Arrold
    Arrold Member Posts: 7

    Tinkerer

    @AnhEZ28 how do I get it off the wall if the stupid ribbons on the provided brackets don't exist any more
  • JackE
    JackE ACE Posts: 45,130 Trailblazer
    >>> the laptop also recognises it because you can drag things into the empty blackness but there's nothing on the screen, I can't get any settings up either, you know, the monitor settings you bring up with the buttons on the bottom.>>>Previously when you powered it on you it would display something that indicated it was searching the various inputs for a signal, I don't get that any more.>>>

    Try plugging the laptop's HDMI cable into a TV set just to make sure the laptop's HDMI output is good.

    Jack E/NJ

  • Arrold
    Arrold Member Posts: 7

    Tinkerer

    JackE said:
    >>> the laptop also recognises it because you can drag things into the empty blackness but there's nothing on the screen, I can't get any settings up either, you know, the monitor settings you bring up with the buttons on the bottom.>>>Previously when you powered it on you it would display something that indicated it was searching the various inputs for a signal, I don't get that any more.>>>

    Try plugging the laptop's HDMI cable into a TV set just to make sure the laptop's HDMI output is good.
    I've got about 4 HDMI cables around my desk, including a 2nd extra screen that uses a 2nd HDMI output, and works, it's not that
  • JackE
    JackE ACE Posts: 45,130 Trailblazer
    If you don't have an extended warranty, an SNID likely won't help with ACER anyway. Can you change the cable without taking it off the wall?

    Jack E/NJ

  • Arrold
    Arrold Member Posts: 7

    Tinkerer

    JackE said:
    If you don't have an extended warranty, an SNID likely won't help with ACER anyway. Can you change the cable without taking it off the wall?
    Power cable & HDMI Cable have been changed, and HDMI used different laptop port currently used for another monitor that definitely works, I've already said all this
  • Arrold
    Arrold Member Posts: 7

    Tinkerer

    Please read stuff if you're going to add to this.

    The wall bracket and the fixings that are attached to the back of the monitor that clasp round the bracket were provided in the box, I did not purchase these separately, you release the clasps with thin ribbons that hung down from the back, these ribbons have literally disappeared over time, a horrible design, I need to know how to now get this thing off the wall
  • JackE
    JackE ACE Posts: 45,130 Trailblazer
    Sorry. Other than using a borescope to try to see what model you have or how  the latch mechanism is attached, there seem to only be two options to get it off the wall. A coat hangar to try to hook onto and pull down on whatever latches the ribbons were attached to. Or brute force.

    Jack E/NJ

  • Arrold
    Arrold Member Posts: 7

    Tinkerer

    @AnhEZ28 I don't have the box