I'm stuck on Tianocore Logo Aspire 3, A315-34-C4FM

Programmer34
Programmer34 Member Posts: 26 Troubleshooter
edited March 2022 in Aspire Laptops
i have acer aspire 3 laptop it shows "Tinanocore" logo on startup and it stuck there, i can't even access bios menu, f1 - f12 all of them not accessible what must i do?, thank you in advance🙏

(Thread was edited to add model name to the title)


«13

Answers

  • JackE
    JackE ACE Posts: 44,891 Trailblazer
    Can you still boot from the USB installer, pressing F12 if needed.?

    Jack E/NJ

  • Programmer34
    Programmer34 Member Posts: 26 Troubleshooter
    @JackE no i'm stuck on the logo, i can't do anything 


  • JackE
    JackE ACE Posts: 44,891 Trailblazer
    Press and hold the power button till the machines shuts off. Then press and hold F2. Then while still holding F2, turn the machine back on.

    Jack E/NJ

  • Programmer34
    Programmer34 Member Posts: 26 Troubleshooter
    still no change

  • JackE
    JackE ACE Posts: 44,891 Trailblazer
    What is your full Aspire 3 laptop model number? For example, A315-23G?

    Jack E/NJ

  • Programmer34
    Programmer34 Member Posts: 26 Troubleshooter
    Acer Aspire 3, A315-34-C4FM
  • JackE
    JackE ACE Posts: 44,891 Trailblazer
    What happens when you press FN key while tapping F2 immediately after startup?

    Jack E/NJ

  • Programmer34
    Programmer34 Member Posts: 26 Troubleshooter
    no change, still that logo

  • JackE
    JackE ACE Posts: 44,891 Trailblazer
    How were you tweaking the firmware? From a USB stick? From the boot drive? What OS?

    Jack E/NJ

  • Programmer34
    Programmer34 Member Posts: 26 Troubleshooter
    Windows 10 from a USB drive
  • JackE
    JackE ACE Posts: 44,891 Trailblazer
    Was a bootable internal drive connected at the same time?

    Jack E/NJ

  • Programmer34
    Programmer34 Member Posts: 26 Troubleshooter
    How ?, I don’t understand 
  • JackE
    JackE ACE Posts: 44,891 Trailblazer
    Did this machine come from the factory with an operating system installed on a bootable internal SSD or HDD connected to the mainboard? If not, did it come from the factory with an empty internal SSD or HDD connected to the mainboard?

    Jack E/NJ

  • Programmer34
    Programmer34 Member Posts: 26 Troubleshooter
    It came with an operating system installed on a bootable internal HDD connected to the mainboard
  • JackE
    JackE ACE Posts: 44,891 Trailblazer
    Try temporarily disconnecting the internal HDD to see if you can gain F2 access to BIOS menu.

    Jack E/NJ

  • Programmer34
    Programmer34 Member Posts: 26 Troubleshooter
    I’ve tried so many times
  • JackE
    JackE ACE Posts: 44,891 Trailblazer
    Next step would be to try to reflash the BIOS by the FN+ESC usb cold boot method. Do have the tianocore flash binary file BIOS_GLK.ROM?

    Jack E/NJ

  • Programmer34
    Programmer34 Member Posts: 26 Troubleshooter
    no i dont have
  • JackE
    JackE ACE Posts: 44,891 Trailblazer
    Follow these steps.

    (1) Must use an empty FAT32 format USB thumbdrive with an activity LED..
    (2) Unzip the latest ACER BIOS v1.10 zipfile at this link. Look for isflash.bin or BIOS_GLK.ROM file. If you can't find it, the unzipped EXE file must be run to further extract on another Windows machine
                                https://www.acer.com/ac/en/US/content/support-product/8063?b=1
    (3) Rename isflash.bin to BIOS_GLK.ROM and copy it  to thumbdrive.
    (4) Plug charger in. Battery must be fully charged. Plug thumbdrive in.
    (5) Press and hold FN+ESC and turn machine on.
    (6) Release FN+ESC when activity LED blinks repeatedly
    (7) If successful, machine will auto shutdown after about 5mins
    (8) Remove USB and try to turn machine back on.


    Jack E/NJ

  • Programmer34
    Programmer34 Member Posts: 26 Troubleshooter
    I tried nothing happens, when i turn the laptop with single press the power button only turns on the LED but screen stays black, unless i long press the power button that’s where it will power on and showing Tianocore logo then screen comes off and then shows tianocore logo then comes off again but power on LED still lights up