nitro 5 an515-43 hardware issue

SHowshi
SHowshi Member Posts: 8

Tinkerer

edited January 2022 in Nitro Gaming
So I have decided to upgrade my ram on my Acer nitro 5 an515-43 (ryzen series). I just have a question, do I need to unplug the battery before putting the ram in or it is ok that the battery is still plug on the mobo? cause I'm scared that their will be a hardware issue or smth please answer

Thread was edited to add model name to the title


Answers

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,464 Pathfinder
    @SHowshi yes, always disconnect the battery first before doing any upgrade on the motherboard.
    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • SHowshi
    SHowshi Member Posts: 8

    Tinkerer

    AnhEZ28 said:
    @SHowshi yes, always disconnect the battery first before doing any upgrade on the motherboard.
    Where do I disconnect the battery from the mobo? and is it ok to have 2 different type of ram because the that I will buy is crucial 8gb and the brand that is inside my laptop is a-data (i think)?
  • SHowshi
    SHowshi Member Posts: 8

    Tinkerer

    And btw can it not be the same speed? like the speed that is needed is 2667 and the memory inside of the laptop is 2667 probably and the one that i will buy is 3200mhz is that ok?
  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,464 Pathfinder
    @SHowshi the battery connector is right below the wifi card and looks like this:
     
    You can use different ram brand and is fine to use 3200MHZ because it will lower to 2667MHZ
    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!