how to install a SSD to Acer Predator Orion 3000-Desktop

Mike86812
Mike86812 Member Posts: 5

Tinkerer

edited April 2022 in Predator Desktops
how do install a SSD to Acer Predator Orion 3000-Desktop? I can find the P2 and P3 plugs but not a motherboard plug?

Answers

  • StevenGen
    StevenGen ACE Posts: 12,174 Trailblazer
    Mike86812 said:
    how do install a SSD to Acer Predator Orion 3000-Desktop? I can find the P2 and P3 plugs but not a motherboard plug?
    See the motherboard diagram below:
    1. The 2.5" drives are at No7 - SATA1~3 - Serial ATA 6Gb/s connectors 
    2. The M.2 drive is at No8 - M2_2 - M.2 (2 280& 2242) slot (for PCIE SSD & Intel Optane memory)
    3. The No18- M2_1 - M.2 (2230/1630) slot for WLAN/Bluetooth
    Predator PO3-600/620 Desktop board


  • Mike86812
    Mike86812 Member Posts: 5

    Tinkerer

    I am still at a bit of a loss. I am alittlw behind the times when building new PCs. Am I missing a cord that need to go into number 8? I basically want to use my 1 TB as a slave drive.
  • xapim
    xapim ACE Posts: 7,253 Pathfinder
    edited January 2022
    Mike86812 said:
    I am still at a bit of a loss. I am alittlw behind the times when building new PCs. Am I missing a cord that need to go into number 8? I basically want to use my 1 TB as a slave drive.
    Mike86812 just plug it into any of the sata ports in the mobo (7) and get the power cable from the PSU should have enough spare sata power left (if youre using a 2.5/3..5" drive) any drive that wont have any OS on it will become secondary  the m.2 slot (8) its dedicated for drives with OS as its a faster port supports nvme in the case youre trying to add another m.2 drive to the existing you need either a usb adapter or a 2.5" enclosure supporting nvme or sata depending on the m.2 drive type) good luck :)

    @StevenGen im not sure as i dont have access to the SG's dashboard for months now does this mobo have only one m.2 or has 2 on top of each other ??? 


    https://www.userbenchmark.com/UserRun/11532543

    UserBenchmarks: Game 43%, Desk 61%, Work 40%
    CPU: Intel Core i5-7300HQ - 63.5%
    GPU: Nvidia GTX 1050-Ti (Mobile) - 41.9%
    SSD: WDC WDS200T2B0B-00YS70 2TB - 71.4%
    HDD: WD WD10SPZX-00HKTT0 1TB - 93.7%
    RAM: Kingston HyperX DDR4 2666 C15 2x16GB - 76.8%
    MBD: Acer Predator G3-572

    I'm not an Acer employee. (just here to help in the best way i can)
    If my answer fixed you issue please accept it for any other users who search for it would find it quickly thanks :)
    If you want to learn more about undervolting/optimizing windows join the Predator fb group and youtube channel:

    Owner/Admin (HOTEL HERO/Red-Sand/Opoka Opoka)
    https://www.facebook.com/groups/PredatorHelios300
    https://www.youtube.com/channel/UCNJwGUHxSJ8FKqAhnOqQuAw
    Acer support:
    https://www.acer.com/ac/en/US/content/service-contact
    http://www.acer.com/worldwide/support/  


  • Mike86812
    Mike86812 Member Posts: 5

    Tinkerer

    This is my board. It looks different from the one listed. I don't seen an open spot?
  • Mike86812
    Mike86812 Member Posts: 5

    Tinkerer

    Here is my ssd.

  • Bibjim
    Bibjim Member Posts: 1 New User
    Mike86812 said:
    Here is my ssd.

    How do I install one of those ssds with 2 hhds in place?
  • billsey
    billsey ACE Posts: 34,246 Trailblazer
    It would help a lot to know which PO 3000 you have. There were substantial differences between the different years. I'm betting you have a PO3-620, 630 or 640. They all use ATX12VO power supplies and have a power connectors on the motherboard to provide power to the drives. If you have two drives installed now then one of those power connectors has a cable running up to the drive bay. There should be another connector just like it adjacent to the one that's for your existing drives. You may or may not have had the extra included in the box with your system. The power cables are available from venues like eBay and Amazon, or by searching on the Acer part number. We need to know which model you have before we can get you the numbers though, same thing with the motherboard diagram. The one posted above looks like it's for a PO3-600 from 2019.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • This content has been removed.