Acer LCD monitor not working - X183H

arkytlol
arkytlol Member Posts: 2 New User
edited November 2021 in Monitors
people here probably hear this ALLL the time, but even me being an expert with monitors of any company, I’ve never seen anything like this. I have fixed tons of monitors in the past (mostly my friends’) and still, I’ve never had any experience with a case like this. I know how to fix this case normally, but I tried everything I knew and still couldn’t figure it out. The model number is: X183H and I got it on: Nov 3, 2008. Here’s a video that shows more of what is going on. Tell me if anyone needs more confirmation.https://youtu.be/lNsORMMCuRg TURN UP VOLUME!!

​//Edited the content to add model name.   ​

Answers

  • ttttt
    ttttt Member Posts: 1,947 Community Aficionado WiFi Icon
    @arkytlol

    If you are an expert in fixing monitors, you probably encountered this before, because this is not that rare a case. I have a similar problem with my X223W Acer monitor. I got it used for 7-9 years, it's probably 10-14 years old like yours.

    Here is a link that I posted, and I agreed with @Billsey this may be the power button board problem.

    https://community.acer.com/en/discussion/650384/x223w-as-extended-monitor-power-light-flashes-for-6-12-minutes-before-come-on-with-steady-blue-light#latest

    I am not going to replace it, as the monitor is so old that there are no new power button boards for it. To get a used one will still be USD $40 + shipping and handling. It is just not worth it, just don't know when it will fail after replacement. I am waiting for it to totally fail and then replace it with a better monitor.

    Currently, my X223W orange light will flash anywhere from fifteen minutes to two hours before it will come on with the steady blue light and get working.

    However, there are somethings you can try, see if this is a similar case to mine.

    1) Leave it on for a long time, see it will turn on eventually.

    2) Plug this monitor to another PC, to rule out PC graphics card problem.

    3) Plug the monitor directly to wall outlet instead of through a power strip, this rule out bad power strip problem.

    4) Swap another cable ( and the video cable too), to rule out bad connecting cable.

    Good Luck !
  • Easwar
    Easwar Member Posts: 6,727 Guru
    Hi @arkytlol,

    To what device this monitor is connected ?
  • arkytlol
    arkytlol Member Posts: 2 New User
    tried everything and then it worked, and showed that the whole thing had been destroyed
  • ttttt
    ttttt Member Posts: 1,947 Community Aficionado WiFi Icon
    @arkytlol

    Just what do you mean by "and showed that the whole thing had been destroyed" ?