image

no bootable device spire 5 model A515-55-55R6

ron316ron316 Member Posts: 10

Tinkerer

i have a aspire 5 model A515-55-55R6 icloned the drive from my older laptop wind 10 i install drive in acer and i get messageno bootable device .i go to bios boot mode and i can tchange it to legacy any help would be great

Best Answer

  • JackEJackE ACE Posts: 30,434 Trailblazer
    Accepted Answer
    You cannot clone Win10 from another laptop with a different serial number. The BIOS won't recognize the hidden security boot partition on the drive that stll has the old laptop's unique serial number
    Jack E/NJ

FAQ & Answers

  • JackEJackE ACE Posts: 30,434 Trailblazer
    Accepted Answer
    You cannot clone Win10 from another laptop with a different serial number. The BIOS won't recognize the hidden security boot partition on the drive that stll has the old laptop's unique serial number
    Jack E/NJ
  • EaswarEaswar Ally Posts: 4,130
    Hi @ron316,

    In the BIOS information page is the unit HDD is showing. 
  • ron316ron316 Member Posts: 10

    Tinkerer

    i ll have to check when i get home.is that in boot section
  • ron316ron316 Member Posts: 10

    Tinkerer

    JackE said:
    You cannot clone Win10 from another laptop with a different serial number. The BIOS won't recognize the hidden security boot partition on the drive that stll has the old laptop's unique serial number
    JackE said:
    You cannot clone Win10 from another laptop with a different serial number. The BIOS won't recognize the hidden security boot partition on the drive that stll has the old laptop's unique serial number
    i have the old laptop i dont know if the windows license is still readable on the sticker
  • ron316ron316 Member Posts: 10

    Tinkerer

    ok so how do i get my applications and files to new laptop
  • JackEJackE ACE Posts: 30,434 Trailblazer
    (1) The HDD must be recognized in the BIOS INFORMATION tab, not the Boot tab.

    (2) Did the A515-55-55R6 come with a factory operating system? If yes, the personal data and programs from the old drive can be transferred to the new drive from a USB port using a 2.5" USB-to-HDD adapter(less than $10)

    (3) What brand and model is the older laptop with Win10?

    (4) Was Win10 factory installed on the old laptop?



    Jack E/NJ
  • ron316ron316 Member Posts: 10

    Tinkerer

    the old laptop has widows 10 upgraded from windows 7 when yhey were doing upgrades its agateway nv55512h and i have the cable for the drive to connect to usb
  • ron316ron316 Member Posts: 10

    Tinkerer

    yes it does reconize the new m2 drive 1tb
  • ron316ron316 Member Posts: 10

    Tinkerer

    the windows 10 came with new laptop
  • JackEJackE ACE Posts: 30,434 Trailblazer
    The cloned gateway drive cannot boot from the new laptop. The partitioning schemes are incompatible with your new laptop setup. You can however use FileExplore on the new laptop to easily copy the personal data and personally installed programs off this old gateway cloned drive with the 2.5" USB-to-HDD adapter to your new laptop's boot drive.
    Jack E/NJ
  • ron316ron316 Member Posts: 10

    Tinkerer

    i ll have to find a video on this for guidance this is all new to me.thanks for the info
  • JackEJackE ACE Posts: 30,434 Trailblazer
    Video? Just buy the 2.5" USB-to-HDD cable adapter from Amazon. Plug the old drive into one end of the cable and plug the other end of the cable into a USB port. Do you really need a video to show you how to plug the cable in?




    Jack E/NJ
  • EaswarEaswar Ally Posts: 4,130
    Hi @ron316,

    Reset this PC and keep my files
    1. Shutdown the unit. Press and hold alt+F10 key. Then turn ON the unit.
    2. You will get a blue screen. Choose the option troubleshoot. 

    3 Ways to Reset Acer Laptop to Factory Settings without Password​​

    3. Select Keep my files to refresh your PC and reinstall your operating system without removing your personal files. Click Next to continue. Important If you have apps installed on your PC, they will be removed. 
    4. Resetting the PC will reinstall Windows, change settings back to their factory defaults and remove all preinstalled apps and programs without removing your personal files. Click Reset to continue.
    5. You will be shown the reset progress on the screen. The screen will turn off during the reset process.
    6. The screen will turn back on when it is installing Windows. Your PC will restart several times during the reset process.
    7. Follow the process until it completes.
    8. When your PC has completed the reset process, Windows will have been reset back to its factory default settings without removing your personal files.​

  • ron316ron316 Member Posts: 10

    Tinkerer

    no to transfer thank you ill try
  • JackEJackE ACE Posts: 30,434 Trailblazer
    OK. Let us know if copying the files works with the USB-to-HDD adapter cable
    Jack E/NJ
Sign In or Register to comment.

Who's Online985

Acer-Erick
Acer-Erick
Acer-Ingrid
Acer-Ingrid
Aizhnn
Aizhnn
Amansagar07
Amansagar07
Berguv
Berguv
Bradys
Bradys
CRad
CRad
Dakor
Dakor
DS549
DS549
Funfly3
Funfly3
gabrielz3
gabrielz3
Gyzmogoddess83
Gyzmogoddess83
Ineedhelpwith
Ineedhelpwith
JoeJohnny
JoeJohnny
Miki17788
Miki17788
Mongou
Mongou
Panther14
Panther14
Rama33
Rama33
replacement3n1
replacement3n1
RevoGz1
RevoGz1
Ritz666
Ritz666
SUNNYSINKU
SUNNYSINKU
whoopy
whoopy
xapim
xapim
ylee49
ylee49
+960 Guests

Join in, share your experience!

It looks like you're new here. Sign in or register to get started.

Assistance by Acer


Drivers &
Manuals

Acer
Answers

Get Product Information
( only)

Acer Support
Videos

Member Highlight

We are honored to have Leostat in the Acer Community. With their dedication, support and effort, Leostat has become one of the main collaborators. On behalf of our Acer Community Team and all of our users, we want to recognize and thank you for your dedication!

Total Posts and Comments: 2032

Total Points:6702

Total Accepted Answers: 254