Xc-603 not recognising additional RAM

Hi,

I recently installed two 4gb RAM modules in my xc-603. I used the Crucial finder to select the Crucial 8GB Kit (4GB x 2) DDR3L 1600 MT/s (PC3L-12800) SODIMM 204-Pin Memory - CT2KIT51264BF160B

After installing the two modules I restarted my computer. It starts and operates fine but still shows 4GB RAM.

How do I make it recognise that it has 8GB RAM now available.

Thanks

Mark

Answers

  • Leostat
    Leostat ACE Posts: 3,043 Pathfinder
    It just does it, check to make sure it's seated right :) may need a plug in and out
  • MarkMFaulco
    MarkMFaulco Member Posts: 2 New User
    Leostat said:
    It just does it, check to make sure it's seated right :) may need a plug in and out
    Leostat, good point…I’ll give it a try. It took a couple of refits to get the primary module to work….so maybe it’s the same issue.
  • billsey
    billsey ACE Posts: 34,614 Trailblazer
    Spec says the Aspire XC-603 supports 1333 memory, not 1600. That also might be the issue. Here's the snip from the service guide.


    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.