how to get the full rgb backlit keyboard - Nitro AN517-52-52T3

System
System Member Posts: 4,562 Seasoned Practitioner WiFi Icon
edited April 2021 in Nitro Gaming
This discussion was created from comments split from: Replace backlit keyboard with full RGB backlit keyboard Nitro 5, model AN517-52-52T3.

Answers

  • Dan99
    Dan99 Member Posts: 9 New User
    Interesting as I was wondering how to get the full rgb backlit keyboard. I have seen photos that show it with full rgb backlit keyboard.
  • batmalin
    batmalin Member Posts: 4,231 Guru
    It is possible but the connector is missing from your MB, so you have to get a JBL2 connector and solder it on the MB and  find a RGB KB with cover which will fit to your model...
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158

  • batmalin
    batmalin Member Posts: 4,231 Guru
    From the picture below you can see that the input is available and it is connected to the EC but you have to solder a physical connector in order to connect the RGB KB.

    On the picture below is your MB where JBL1 is connected (Green Circle) and JBL2 is empty - no connector (Red Circle),

    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158

  • Dan99
    Dan99 Member Posts: 9 New User
    Batmalin do you have resources where one could find this stuff?
  • batmalin
    batmalin Member Posts: 4,231 Guru
    Shematics and boardviews are available in  internet for some of the models.
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158