How to set custom boot logo on Acer Nitro? Tried JPG and GIF but no effect

I have tried all thing but cant change boot logo, saved photo edited in paint to jpeg and 768x432 resolution or downloading with compatibility resolution and jpeg/jpg format, and i have one more question, in nitrosense you can see to choose jpg/jpeg or gif, how i can install gif to boot logo?

Choosing new boot logo and after restarting nothing changed

Accepted answers

GAMING6698

https://community.acer.com/en/discussion/727841/nitrosense-cant-change-boot-logo

Don't try to change that. It's broken.

Many Nitro and Predator users have tried changing the boot logo, but it often causes the system to get stuck at the logo screen. The solution isn't straightforward — in some cases, it requires swapping the SSD from laptops to remove nitrosense field, and in the worst case, a visit to the acer service center.

All comments

GAMING6698

https://community.acer.com/en/discussion/727841/nitrosense-cant-change-boot-logo

Don't try to change that. It's broken.

Many Nitro and Predator users have tried changing the boot logo, but it often causes the system to get stuck at the logo screen. The solution isn't straightforward — in some cases, it requires swapping the SSD from laptops to remove nitrosense field, and in the worst case, a visit to the acer service center.

temurbek

https://community.acer.com/en/discussion/comment/1350809#Comment_1350809

okey bro, thank you for your answer

Axxo

While NitroSense allows users to select a boot logo, the changes don't always apply correctly upon restart, and some users have reported experiencing boot loops or freezes.
Here's a breakdown of the issue and potential solutions:-

NitroSense Compatibility Issues:-
NitroSense might be encountering compatibility issues with the system's software or hardware configuration, preventing the boot logo change from taking effect.

Boot Loop/Freeze:
Some users have reported that after changing the boot logo, their laptop gets stuck in a boot loop or freezes during startup.

Incorrect File Format/Resolution:
The chosen boot logo file might not be in the correct format (e.g., JPG/JPEG, GIF) or resolution (e.g., 768x432).

Troubleshooting Steps:-

1. Check Compatibility: Ensure NitroSense and its drivers are up to date.
Verify that the chosen boot logo file format and resolution are supported by NitroSense.
2. Restart and Check BIOS: If the boot logo doesn't change, restart the laptop and enter the BIOS settings.
Look for settings related to boot animation or logo display and ensure they are enabled.
3. Consider BIOS Update: An outdated BIOS could be a cause of the problem. Check the Acer support website for your specific model for the latest BIOS update.

-----------------------------------------
If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful.

Diya1811

NitroSense’s boot logo customization feature is buggy and inconsistent across models, including the Nitro V15. Even when following all the correct steps—using a JPEG or GIF in the right resolution—the logo often fails to apply, or the system doesn’t restart properly to trigger the change.