Acer Orion p03-650 boot loop after ram swap

Andy44
Andy44 Member Posts: 1 New User
edited 2:13PM in Predator Desktops

I recently swapped my ram on my p03-650 while doing so i realized im using XMP ram after already booting the system resulting in a bootloop i switched back to the original ram and cleared CMOS but the bootloop still occurs what else can i do now to solve the problem

Best Answer

  • Sharanji
    Sharanji ACE Posts: 4,654 Pathfinder
    Answer ✓

    @Andy44

    While you've switched back to the original RAM, double-check that XMP is disabled in the BIOS/UEFI settings. Load the BIOS/UEFI default settings to ensure a clean slate. 

    I hope this helps! If this was useful, please hit 'Yes' or 'Like'! Thanks! 😊

Answers

  • Sharanji
    Sharanji ACE Posts: 4,654 Pathfinder
    Answer ✓

    @Andy44

    While you've switched back to the original RAM, double-check that XMP is disabled in the BIOS/UEFI settings. Load the BIOS/UEFI default settings to ensure a clean slate. 

    I hope this helps! If this was useful, please hit 'Yes' or 'Like'! Thanks! 😊