Acer Nitro AN16-41 after trying overclocking from hidden settings in BIOS, screen did not come back

Serwintes
Serwintes Member Posts: 9 New User
edited February 18 in Nitro Gaming

MHello, after trying overclocking from the hidden settings of the BIOS, the screen did not come back. The lights, fan and BIOS recovery mode are working. But I do not know what the name of my BIOS file should be. I will use flash memory for this. My motherboard is ZGU and device's full name is Acer nitro an16-41 r1pr.

[Edited the thread to add issue detail]

Answers

  • Sharanji
    Sharanji ACE Posts: 4,467 Pathfinder

    @Serwintes

     Overclocking can sometimes cause instability, especially if done through hidden BIOS settings. Here are some steps you can try to resolve the issue:

    1. Reset BIOS to Default Settings:
      • Power Off: Turn off your laptop completely.
      • Enter BIOS: Turn it back on and immediately press the F2 key repeatedly to enter the BIOS setup.
      • Load Defaults: Once in the BIOS, look for an option to load default settings (usually under the "Exit" tab). Select it, save the changes, and exit.
    2. BIOS Recovery:
      • BIOS Recovery Mode: Some Acer laptops have a BIOS recovery mode. To access it, turn off your laptop, then press and hold the Fn + Esc keys while pressing the power button. Release the keys after a few seconds.
      • USB BIOS Recovery: If the above method doesn't work, you might need to perform a BIOS recovery using a USB drive. Download the latest BIOS file for your model from the Acer support website Acer download AN16-41
      • Follow the instructions provided to create a BIOS recovery USB drive. Upgrading your system BIOS incorrectly could harm your Acer product. Please proceed with caution.

    If the above steps don't resolve the issue, it might be best to contact Acer's customer support for further assistance. Acer Support

    I hope this helps! If this was useful, please hit 'Yes' or 'Like'! Thanks! 😊

  • Serwintes
    Serwintes Member Posts: 9 New User

    My BIOS already corrupted. I cant even enter BIOS with F2. I need recovery it with usb driver but I dont know what should be the fd file name. I have two files. ZGU2r.fd and ZGUr.fd. ZGUr.fd for my laptop.