How to download restore media? I have a Spin 3 SP314-51 laptop & am replacing the SSD.

Codyb
Codyb Member Posts: 7

Tinkerer

edited January 1 in Swift and Spin Series

Hi, I have a Spin 3 SP314-51laptop and am replacing the SSD. Where can I find a download to restore the Windows OS onto the new SSD? I did not find the OS available in the download drivers/manuals section of the website. Any assistance is greatly appreciated.

[Edited the thread to add model number to the title]

Answers

  • Alejandro_AC
    Alejandro_AC ACE Posts: 13,631 Trailblazer

    Hi @Codyb it is not available on the team's download site, please review the following information:

    Acer Recovery Media - Acer Community

    Regards.

    • Haga clic en "Me gusta" si mi respuesta fue útil o márquela como solución si se resolvió, ¡gracias!
    • Colaborador pro bono, no trabajo ni hablo en nombre de Acer
    • Please click "Like" if my answer was helpful or mark it as solution if it was solved, thanks!
    • Pro bono contributor, I do not work or speak on behalf of Acer
    • MVP de MSFT (2003-21) & Windows Insider & (alezmvp)
  • billsey
    billsey ACE Posts: 34,801 Trailblazer

    If the original drive still works, it's much easier to just clone it to the new drive than to deal with purchasing a recovery drive from Acer. Your SP314-51 has a single SATA M.2 slot, but the block diagram suggests it should also work with an NVMe drive.

    They wouldn't have pulled those four PCIe channels over if it were just SATA… Your existing drive is likely SATA though. What I would do is choose an appropriate replacement drive in the size your prefer (1TB or 2TB seem to be the best size/price ratio these days) and an external case that can handle both SATA and NVMe drives. Put the new drive in the case and connect it to the computer. Use most any of the cloning apps (I used Macrium Reflect free last time I did it) to clone the old drive to the new one, then look at them both in Disk Management. If the clone went as expected both drives will have the same partitions shown, with the exception of your system partition which will have been resized to match the new drive size. If all looks OK, remove the old drive and install the new one. Boot to verify everything works as expected (if you go the NVMe route it should be a fair amount faster), then put the old drive in the external case and you can use Disk Management to wipe all old partitions from it, create a single new partition and use it as a data drive for things like backups or offline data.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.