Acer T232HI Monitor Power Adapter not working, Need help in finding replacement

Doug_Case69

I have an old Acer 2332hl monitor and it appears the power adapter has gone bad. At least the LED on it does NOT light anymore. I looked around on Amazon for a replacement but there are 5 pages of them. I noticed there are 3 different types of connectors (plugs) for the monitor end.

Also I couldn't find any with my correct model number (of the Monitor). I saw some for H232hl, 231hl, and 230hl, but none for the 2332hl. Probably because this monitor is so old.

Can anyone point me in the right direction here please? Any assistance would be most appreciated.

BTW here is a photo of the tag on the adapter.

StevenGen

https://community.acer.com/en/discussion/717757/power-adapter-for-old-monitor-acer-2332hl-any-assistance-would-be-most-appreciated

The model that you gave the Acer 2332HL monitor is not listed, are you sure that is the correct model number and its not the Acer S232Hl?

What I suggest that you do is to first measure the diameter and length of the barrel pug and then search for the model ADP-40PH BB adapter with the barrel plug end dimensions, as the adapter that you want is a 40W 19V 2,1A type adapter. Good luck.

If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍

billsey

The key is the 19V@2.1A power and the connector size. Once you have those matched you should be good to go. The monitor model you provided isn't a good number, maybe the T232HI, which is a touchscreen monitor? Anyway, the connector is likely a 5.5mm barrel…

Doug_Case69

Thank you both so much, I really appreciate the help. And you were both right the Model number I gave you was wrong. I am 70 and my eyesight is not so good anymore. I used a Magnifying glass on the label and sure enough it is a 232HL. Sorry for the mistake, but again thanks for your help.