Acer Triton 300 not turning on, battery lights do not show, randomly stopped working.

Amos00
Amos00 Member Posts: 1 New User
edited December 11 in Predator Laptops

My acer laptop (triton 300) randomly stopped working one day. The lights do not show like they did when it worked, and I just replaced the battery but nothing happened. My warranty ran out so I can’t get it fixed. What is the problem?

[Edited the thread to add issue detail]

Best Answer

  • Puraw
    Puraw ACE, Member Posts: 14,011 Trailblazer
    Answer ✓

    Hi, try the Power drain + CMOS reset method: Open the back of the laptop and disconnect the battery cable from the motherboard. Locate the CMOS module (with 2 twisted wires Red and Black under the battery) and remove the coin battery. Shorten the +/- terminals inside the CMOS capsule for 2 seconds with a bended paperclip and put the coin battery back with the + sign facing up, close the CMOS capsule. Next, press the Power Button on the keyboard for 10-15 seconds after that remove the two RAM modules and firmly reseat the modules back in the 2 slots. Reconnect the battery cable to the motherboard. Close the laptop, plug-in the adapter and try to boot. Note; if you have a spare set of RAM module(s) replace the RAM modules. If still no booting possible bring the laptop to Acer Services in your country.

Answers

  • Puraw
    Puraw ACE, Member Posts: 14,011 Trailblazer
    Answer ✓

    Hi, try the Power drain + CMOS reset method: Open the back of the laptop and disconnect the battery cable from the motherboard. Locate the CMOS module (with 2 twisted wires Red and Black under the battery) and remove the coin battery. Shorten the +/- terminals inside the CMOS capsule for 2 seconds with a bended paperclip and put the coin battery back with the + sign facing up, close the CMOS capsule. Next, press the Power Button on the keyboard for 10-15 seconds after that remove the two RAM modules and firmly reseat the modules back in the 2 slots. Reconnect the battery cable to the motherboard. Close the laptop, plug-in the adapter and try to boot. Note; if you have a spare set of RAM module(s) replace the RAM modules. If still no booting possible bring the laptop to Acer Services in your country.