Predator PO5-650-Query-How to do the installation of Arctic Liquid Freezer III AIO water cooling sys

Options
AmigoSan
AmigoSan Member Posts: 3 New User
edited December 2024 in Predator Desktops

I recently bought a water-cooling system from Arctic (https://www.arctic.de/en/Liquid-Freezer-III-280-A-RGB-Black/ACFRE00143A), and I would like to know how to connect and configure it, can you give me some tips/advice?

[Edited the topic title to include the topic issue.]

Answers

  • StevenGen
    StevenGen ACE Posts: 15,166 Trailblazer
    edited December 2024

    There are no guides of any Acer community members that have used this Arctic AIO water cpu cooer, as most community members use the Noctua cpu coolers like the NH-U9S chrome_black or the NH-U12S chrome_black type dry coolers.

    I don't know if the Liquid Freezer III 280 A-RGB (Black) 317 (L) x 138 (W) x 38 (H) mm radiator will fit into the PO5-650 case as you could have problems as its too big, usually a 240mm radiator is the size used.

    This is the Acer RGB Header connection guide for the PO5-650 fans, so follow this guide as it should work for the Arctic AIO cpu cooler RGB fans.

    image.png image.png

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍

  • AmigoSan
    AmigoSan Member Posts: 3 New User

    Oh sorry, my mistake, it is 240 not 280, but i am actually interested how the fans and pump work with this setup and motherboard software/predator sense? And which cable i should to use for connection, this one:

    arctic1.jpg

    or this:

    arctic2.jpg
  • billsey
    billsey ACE Posts: 36,353 Trailblazer

    Here is the board layout for the PO
    5-650:

    image.png image.png image.png

    The key notes are that the CPU_FAN no longer connects to a fan, it is used instead to run the cooling pump, and SYS_FAN_1 & 2 are now used to run the fans for the cooler. That is the way the motherboard is setup on the PO7-650 mach8ines, which uses the same motherboard as the PO5-650. So, if your AIO physically fits, that's the way you want them wired.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Avi2k
    Avi2k Member Posts: 2 New User

    Hello AmigoSan, please i need your help. I have a Acer Orion Predator 3000 P03-655

    And I would love to install the Arctic Liquid Freezer 3 Pro.

    But I just don´t see any enough space here to build this thing inside.

    Please can you help me and show me how you placed your radiator and fans inside please.

    It would be so helpfull for me.

    Thanks a million

    Cordially Av

  • Cookiemonster2001
    Cookiemonster2001 Member Posts: 24 Networker

    Really need to upgrade the case. it's just too small and cramped. Plus you need to remove motherboard to fit Intel mounting anyway

  • Avi2k
    Avi2k Member Posts: 2 New User

    Ok Thanks a million :)

    I like the predator case, do you have any recommendation of any case that looks in that style?

  • Cookiemonster2001
    Cookiemonster2001 Member Posts: 24 Networker
    edited August 2

    I've just transplanted a Predator into Antec Flux Pro, but if that's too big or expensive there is the Antec Flux.

    If you do get the Flux, the PSU cables may be too short so you might need CPU extension cables. With the Pro, they're long enough but you'd need to adjust the PSU orientation to 90' (cables pointing towards motherboard) You'll also lose wifi, as the antec case has soldered in aerials, so you'd need to buy a aerial kit for the wifi board.

    Also need front panel extensions for power and reset. You'll lose the front USB as well.