How to access BIOS option for CPU & Memory setting Predator G3-605?(BIOS Version P11-C1 (2.15.1236))

R1pP3r85
R1pP3r85 Member Posts: 1 New User
edited October 25 in Predator Desktops

Hi everyone,

I'm attempting to upgrade the memory on my Predator G3-605 to 32GB, but I seem to be encountering issues. It looks like the motherboard isn't allowing the upgrade due to default memory settings. Even my current 16GB RAM isn't running at full capacity. I can't find the memory or CPU settings in the BIOS, despite having the latest BIOS update installed.

Does anyone have any advice or suggestions on how to resolve this? Any help would be greatly appreciated!

[Edited the thread to add model name to the title]

Best Answer

  • billsey
    billsey ACE Posts: 34,246 Trailblazer
    Answer ✓

    Yes, Puraw had a mistype there. Maximum memory is 32GB, not 24GB, using four 8GB DIMMs. You can use 1866MHz memory, but it won't run any faster than the 1600MHz the motherboard and chipset support. Likely 1600 is cheaper, so just stick with that. With DDR3 (note, not DDR3L) I don't believe XMP overclocking is an option and your system wouldn't support it if it were. There are no BIOS settings needed, just install the memory as shown in the chart and the BIOS will recognize it.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.

Answers

  • Puraw
    Puraw ACE, Member Posts: 13,419 Trailblazer
    edited October 24

    Hi, latest BIOS is from 2014, and older BIOS versions don't have an option for overclocking or any other RAM setting. You can upgrade RAM to a maximum capacity of 24GB with DDR3-1600MHz or even DDR3-1866MHz UDIMMs. Supports 2, 4 or 8GB DDR3 modules (see table):

  • StevenGen
    StevenGen ACE Posts: 12,172 Trailblazer

    Further memory information to add to what Puraw listed above for your Predator G3-605 desktop, you need to use specific and the exact Acer specified ram like listed below. Good luck and hope this helps you out further.

    Memory module recommended and tested by Acer with this desktop, for the max 32GB ram capacity recommended for this desktop use 4x 8GB modules highlighted below:

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍

  • billsey
    billsey ACE Posts: 34,246 Trailblazer
    Answer ✓

    Yes, Puraw had a mistype there. Maximum memory is 32GB, not 24GB, using four 8GB DIMMs. You can use 1866MHz memory, but it won't run any faster than the 1600MHz the motherboard and chipset support. Likely 1600 is cheaper, so just stick with that. With DDR3 (note, not DDR3L) I don't believe XMP overclocking is an option and your system wouldn't support it if it were. There are no BIOS settings needed, just install the memory as shown in the chart and the BIOS will recognize it.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.