-
What Is Virtual Memory and How Can You Adjust It on Windows PCs?
The typical amount of random access memory (RAM) on most PCs isn’t always enough to handle multiple programs running at once. Whenever you’re multitasking on your computer, there’s a behind-the-scenes process that makes it possible: virtual memory. This vital feature manages your computer’s memory, extending it beyond the physical limits of your RAM and enabling you to multitask without fuss. Read on for a summary of what virtual memory is, why it’s important, and how to check and increase virtual memory on Windows PCs like the recently launched Acer Swift 14 AI Copilot+ PC.
What is Virtual Memory?
Virtual memory is a feature that enables modern PCs to handle more tasks than their physical memory, or RAM, can support. Think of it as a clever trick wherein your computer uses a portion of your hard drive as if it were additional memory. When you run multiple applications simultaneously, your computer might run out of RAM. Virtual memory steps in by temporarily transferring less-used data from the RAM to the hard drive. It frees up physical RAM for more critical tasks and for the programs you actively use, allowing the system to continue functioning smoothly. This process happens seamlessly and lets you continue working without interruption.
One of the ways virtual memory works is through a technique called “paging.” When your computer needs more memory, it moves data from RAM to a specific file on your hard drive known as the “paging file” or “page file,” typically located on the system drive. This allows your system to create the illusion of having a much larger memory capacity than what is physically available.
Virtual memory can be a cost-effective solution for memory management, since it provides an alternative to investing in additional physical RAM, which can be expensive. However, its drawback is that accessing data from the hard drive is slower than accessing it from RAM. Relying too heavily on virtual memory can lead to performance slowdowns, especially if your computer must constantly swap data between the RAM and the hard drive.
https://www.youtube.com/watch?v=qeOBEOBJREs
Why is Virtual Memory Important?
Virtual memory is a crucial component of modern operating systems, particularly in managing the memory demands of various applications and processes. Here are some roles virtual memory plays in enhancing system performance and user experience:
* Preventing System Crashes: By providing an additional layer of memory, it helps prevent the system from running out of memory, which can lead to crashes and data loss.
* Improving Performance: It allows the system to handle more applications and processes simultaneously, enhancing overall system responsiveness and performance.
* Supporting Crash Dumps: In the event of a system crash, a sufficiently large paging file is necessary to create a complete memory dump, which is crucial for diagnosing and fixing the issue.
How to Check Virtual Memory Settings on Windows
To check and adjust the virtual memory settings on a Windows PC, follow these steps:
1. Go to your Settings to access your advanced system settings. There are multiple ways to do this in Windows 10 and 11. You can press the Windows key, type “About your PC,” and press Enter, or in the System window, click on “Advanced system settings” under the "Related settings" section.
Alternatively, you can search “Advanced system settings” in the Start menu or use the keyboard shortcut Windows key + R, then type “SystemPropertiesAdvanced” and hit Enter.
2. When the advanced system settings window pops up, click Settings in the Performance section.
3. In the Performance Options window, click the Advanced tab. Look for the Virtual memory section, then click the Change button under it.
4. You’re now viewing your current virtual memory settings. The Virtual Memory window displays the initial and maximum page file sizes stored on each disk. You can check these settings and decide whether to adjust them.
How to Increase Virtual Memory on Windows
If you want to increase the virtual memory, you can do so manually by following these steps:
1. Uncheck Automatic Management.
In the Virtual Memory window, uncheck the box at the top that says “Automatically manage paging file size for all drives.”
2. Select Custom Size.
Select the drive for which you want to adjust the page file size, then click the radio button next to “Custom size.”
3. Set Initial and Maximum Sizes.
Enter the desired “Initial size (MB)” and “Maximum size (MB).” A common recommendation is to set the initial size to 1.5 times the amount of physical RAM and the maximum size to three times the amount of physical RAM.
4. Apply Changes.
Click the Set button and then the OK button to save the changes. You may be prompted to restart your computer for the new virtual memory settings to take effect.
If you want to undo the changes and revert to default settings, navigate to your virtual memory settings and check “Automatically manage paging file size for all drives.” Apply the change and restart your PC.
Virtual memory is a hidden resource that can make a world of difference in how your computer runs, no matter what kinds of tasks you use it for. Whether you’re a casual user or a tech enthusiast, it’s worth taking the time to understand virtual memory and how to adjust its settings. You can then optimize your system’s performance, especially when your physical RAM is limited.
Subscribe to the weekly Acer Corner Email Digest to receive our latest articles on PC Tech, Gaming, and more. Visit this page to sign up.
Recommended Products
Swift 14 AI Laptop
Shop Now
Aspire Vero 14 Laptop
Shop Now
Swift X 14 Laptop
Shop Now
About Micah Sulit: Micah is a writer and editor with a focus on lifestyle topics like tech, wellness, and travel. She loves writing while sipping an iced mocha in a cafe, preferably one in a foreign city. She's based in Manila, Philippines.
-
What is Windows Recall and Why is Microsoft Bringing it Back?
In life there are things we remember and things we forget. From a cherished childhood memory to remembering where we left our keys, it's important to remember! Beyond managing the hustle and bustle of everyday life and staying on top of practical necessities, we also need to keep track of a vast array of documents, files, apps, and websites. Traditionally, navigating the history of your activities on your PC was a laborious task, with files seemingly hiding in the labyrinth of the Windows OS. Oh, how the world longed for an intuitive, user-friendly way to retrace our steps and locate important files!
It’s safe to say that we are now well and truly in the early days of AI-enhanced PCs. From cloud-based AI assistants and chatbots, to on-device NPU generated AI power, the applications of AI for PC users are many. Windows Recall is a brand new AI enhancement for Windows 11 that uses on-device AI to track and capture everything you do on your PC. At a later date, when you need to find anything, you can interact with Recall using natural language. For example, if you need to find a photo from your fishing trip with ol’ uncle Bob, instead of trawling through thousands of photos, you could simply describe the image for Recall to locate.
Now, you may be thinking Recall sounds like a great idea, or you may fear that this is a way for Windows to steal all of your information. Either way, if you want to get the lowdown on this controversial addition to Windows, and discover how to disable Windows Recall read on!
What is Recall and when can I get it?
If you’re wondering when Recall from Microsoft is coming out, well it's a slightly tricky question to answer. First announced on May 20, Windows Recall was originally slated to be introduced in June as part of the Windows 11 update. Alas, some things are not meant to be. Due to security and privacy concerns, as well as some serious consumer backlash, a preview version of Recall feature is now set to be released this October. To use Windows Recall, you’ll need a Copilot+ PC, a new generation of AI enhanced computers with onboard NPUs designed to run programs like Recall.
So, what exactly is Recall? Very simply, Recall lets you search across the timeline of your PC for the content you require and easily re-engage with it. Recall takes snapshots of your screen every 5 seconds, which are then stored and analyzed locally. 3 months of history is stored by default. At a later date, you can simply search for any file by describing it to Recall, which then displays results from all apps where the program finds matches. Displayed under headings of text and visual matches, both close and related matches can be opened and interacted with as you please.
What can Recall do for me?
There are several benefits that Windows Recall can bring to users of all stripes. A huge amount of time can be saved by quickly retracing your digital steps to locate recent files and documents. With Recall, hours of trawling through the memory banks of your PC will soon be nothing but a distant memory! Recall can also improve your productivity. Thanks to its visual nature, users can swiftly locate tasks they were previously working on, without spending ages trying to locate apps or files. For many of us, this visual organization of our work is a most welcome addition that can help streamline our multitasking and workflow. If you’re working on complex projects, or simply want to quickly find the things you need with minimal hassle, then Recall can certainly help.
Why the initial backlash?
Security concerns around the initial Recall release caused an uproar. Microsoft has a fecund history of data breaches, so many users and journalists felt that entrusting more info would simply put users at even more risk. While there are many levels to the security concerns affecting different users, the FAQ dutifully informs us: “Note that Recall does not perform content moderation. It will not hide information such as passwords or financial account numbers.”
While storage is local, Recall could be a malicious threat actor’s dream come true. A candy shop for computer criminal ne’er-do-wells! In seconds, info-stealer malware could harvest passwords and bank details as well as three months of snapshots from the targeted PC. Other issues raised by the release of Recall include privacy concerns, as well as reduced user control over their activity history and files.
The recall of Recall
While the giants of the tech world hurry to integrate AI into their products, it is human consumers who eventually decide what works, and what doesn’t. On June 13, Microsoft Corporate Vice President for Windows and Devices Pavan Davuluri reassured users on the Windows Blog, "We will continue to build these new capabilities and experiences for our customers by prioritizing privacy, safety and security first.” As such, the Recall (preview) is now in a phased rollout, with the preview available to Windows Insider Program (WIP) users just in time for Halloween, in October.
After the backlash, Microsoft has taken several steps to remedy the situation and regain the world’s trust. Firstly, the swiftly re-named Microsoft Recall (preview) will be opt in, as opposed to opt out when it is launched on Copilot+ PCs.
Secondly, for users to enable Recall (preview), it will require Windows Hello biometric security, as well as other authentication features for increased security. For further info, check out the Windows blog piece in the previous paragraph.
How to disable Recall on Windows 11
Thankfully, it's pretty simple to turn off Windows recall (preview) by following these steps:
Open the Settings app and navigate to Privacy & Security > Recall & snapshots. Turn off the toggle next to Save snapshots.
To delete the snapshots Recall has saved on your PC, in the same menu click Delete all snapshots.
The future of Recall
Time will tell whether we’ll look back on the release of Windows Recall (preview) with fondness, or if, akin to Douglas Quaid in Total Recall, our memories will lead us into a world of trouble. After Windows Recall (preview) becomes available to Copilot+ PC users this October, there will certainly be further evolutions in the software. From integrations with other Microsoft products and services to performance enhancements, if the initial concerns sparked by Recall are properly addressed, it may well become an integral part of the Windows experience.
Recommended Products
Swift 14 AI
Buy Now
Swift Go 14
Buy Now
-
Adapting to a New World: Major Updates in Frostpunk 2
Frostpunk 2, the highly anticipated sequel to the acclaimed city-building survival game Frostpunk, is set to expand upon its predecessor in numerous ways. Developed by 11 Bit Studios and scheduled for release on September 20, 2024, the game promises to deliver a richer narrative, enhanced gameplay mechanics, and a broader scope of city management.
Frostpunk 2 platforms include PC, PlayStation 5, and Xbox Series X|S, and a Frostpunk 2 Gamepass on PC and Xbox has also been announced. For PC users, a high-quality machine like the Nitro 17 Gaming Laptop is an excellent choice, as it exceeds the game's recommended system requirements.
New London's Growth and Development
Frostpunk 2 takes place 30 years after the events of the first game, where players again face the challenges of survival in a world gripped by a relentless ice age. This time, players assume the role of the Steward, the leader of New London, a city struggling not just for survival, but also for stability and growth amidst societal upheaval. The narrative shifts from mere survival to navigating complex political landscapes, as various factions within the city vie for power and influence over its future. The game emphasizes the need for players to balance the competing interests of these factions while managing the city's resources and infrastructure.
Changes in Resource Management
One of the most significant updates in Frostpunk 2 is the overhaul of the resource management system. While the original game focused heavily on coal as the primary energy source, the sequel introduces oil and nuclear power, adding layers of complexity to resource management. Players must now balance the production and consumption of various resources, including food, energy, and raw materials, while responding to the fluctuating demands of a larger population.
The new supply and demand system requires players to be more strategic in their resource allocation. For instance, as the city expands, the demand for food and energy increases, necessitating the exploration of new areas and the establishment of additional resource extraction sites. This shift from a singular focus on survival to a more nuanced approach to managing a thriving metropolis marks a significant evolution in gameplay.
What's New in Frostpunk 2?
Frostpunk 2 significantly increases the scale of city-building compared to its predecessor. Players can now construct entire districts instead of individual buildings, allowing for a more organic and expansive city layout. The introduction of hexagonal tiles for city planning enables players to develop their district in a more strategic manner, as each tile must be "frostbroken" before construction can begin. This mechanic enhances the realism of city expansion and adds a tactical layer to urban development.
The population has also grown from hundreds in the first game to potentially thousands in the sequel. This increase necessitates a more complex management system, as players must address the needs and demands of a larger citizenry while maintaining order and efficiency.
https://youtu.be/gCwR9LYQf7I?si=VFZDrIKLGRdGAWsr
New Social Systems
A notable addition to Frostpunk 2 is the introduction of a council system, where players must navigate the interests of various factions. Each faction has its own vision for the future, and players must engage in political maneuvering to pass laws and make decisions that impact the entire city. This system replaces the more authoritarian approach of the first game, where players acted as sole dictators.
The new social resources—Relations, Tension, and Trust—replace the original's discontent and hope metrics. These resources reflect the dynamics between factions and the overall stability of the city. Players must carefully manage these relationships to prevent unrest and ensure the smooth operation of their metropolis. The complexities of governing a diverse population add depth to the gameplay, as players must weigh the consequences of their decisions on different factions.
Changes in Gameplay Mechanics
Frostpunk 2 introduces several gameplay improvements designed to enhance the player experience. The pacing of the game has shifted from hourly management to a daily production cycle, allowing for a more streamlined approach to resource gathering and city governance. This change encourages players to think ahead and plan for longer-term goals, rather than focusing solely on immediate needs.
Additionally, the game features a more intricate law-making system, where players must gather votes from council members to enact new policies. This democratic approach adds a layer of strategy, as players must consider the political ramifications of their decisions and the potential for backlash from factions that feel marginalized.
Improved Playing Experience
Frostpunk 2 leverages the power of Unreal Engine 5, promising stunning visuals and immersive environments. The engine's capabilities allow for enhanced graphics, improved lighting, and more detailed animations, creating a visually striking experience that captures the harsh beauty of the frozen world. The transition to this new engine also enables more complex simulations of city life, making the world feel more alive and responsive to player actions.
The game introduces significant improvements to its user interface (UI), aiming to create a more user-friendly experience. A new dedicated construction menu will help players plan their cities more effectively, especially as the game expands to include larger districts and complex structures.
The Idea Tree, representing technological and social advancements, will be revamped for improved clarity and readability, enabling players to make informed choices about their city's direction. Five new city hubs will provide distinct areas to manage resources and services, integrated into the UI for better oversight.
The heads-up display (HUD) in Frostpunk 2 is likewise receiving major enhancements. The new design focuses on a streamlined information display, allowing players to quickly access vital data, such as resource levels and population needs, without navigating complex menus. Player feedback from the beta has emphasized the need for better visibility of key metrics, prompting prioritization of important elements like resource balances and timers.
The user-friendly design features larger, more prominent elements for easier reading and interaction, especially during critical moments. Accessibility options, including UI scaling, will accommodate diverse player preferences, ensuring an enjoyable experience for all.
Finally, Frostpunk 2 will launch with a new modding tool called FrostKit, enabling players to create custom maps, models, and scenarios. Developed in collaboration with mod.io, FrostKit leverages the capabilities of Unreal Engine, allowing for deeper customization compared to the original game. The tool will be iteratively upgraded based on community feedback, fostering creativity and expanding gameplay possibilities from day one. This addition addresses long-standing player requests for mod support, promising to enhance the game's longevity and engagement within the community.
https://youtu.be/2a-qKtx5DJU?si=-0vW6zOCXnn_jcSs
Frostpunk 2 represents a significant evolution in the series, offering enhanced gameplay mechanics, social systems, and visual improvements. With a focus on political intrigue and complex city management, players will face new challenges as they guide New London through the complexities of survival and growth in a world that's beautifully rendered, but frozen and unforgiving.
Recommended Products
Nitro 17 Gaming Laptop
Shop Now
Predator XB3 Gaming
Monitor
Shop Now
Predator Helios 18
Gaming Laptop
Shop Now
About Lalaine Capucion: Lalaine has been working as a freelance writer and editor for more than 12 years, focusing on lifestyle, travel, and wellness. When she isn’t writing, she's most likely curled up with a good book or trying out a new recipe in the kitchen. She lives in Metro Manila, Philippines.
-
Predator Series Backpacks & Suitcase: Secure Your Gear with Confidence
Safely transporting laptops from home to the office or other locations can be tricky. Many laptop bags only offer cosmetic protection and do not safeguard against accidental bumps or falls. This problem is particularly troublesome for gamers, who spend large amounts of money on gaming laptops and accessories. As such, backpacks for gaming laptops are ideal for gamers who want to transport their devices to gaming sessions, conventions, or other locations. They provide a secure pocket and extra padding to keep devices safe while users are on the move. When packing devices into gaming laptop backpacks, users should be careful not to place the mouse or other accessories in the same pocket to avoid damage. Switching off the laptop before inserting it into a laptop backpack also prevents the risk of overheating, which can harm the device.
Here are some tips on how to choose the best laptop backpack.
* Padded compartments: Laptop backpacks should include adequate padding to keep devices safe while traveling. If padding is lacking, laptops could suffer from bumps or being placed awkwardly on hard surfaces. Users should skip backpacks with little or no padding and adopt the general rule that more padding is better.
* Water-resistant material: Transporting expensive devices during heavy downpours can be worrying. Water-damaged laptops can be difficult to fix as exposure to water can cause significant harm to devices. As such, selecting a laptop backpack made from water-resistant material is imperative to keep devices safe in all weather. Furthermore, backpacks with separate water bottle pockets are a great way to avoid leaks or spillages from leaky bottles.
* Correct size: Laptop backpacks range from 14 to 17 inches (35.56 cm 43.18 cm). To offer the convenience of portability, users must choose the right size to accommodate their device and avoid unintentional damage. Pockets that are too large may not offer snug protection and cause unnecessary bouncing, whereas pockets that are too small may be restrictive and not close properly.
Acer Predator series backpacks and suitcase for ultimate protection
Acer’s Predator suitcase and backpack range are designed to provide gamers peace of mind while traveling with their laptops. Here are our top picks.
1. Predator gaming utility backpack
The Predator gaming utility backpack in black and teal is ideal for storing and transporting the Acer Predator Notebook. At 17 inches deep (43.18 cm) and with a length of 20.5 inches (52.07 cm), the Predator gaming utility backpack fits most gaming laptops. It comes with a handy shoulder strap for easy portability or a chest strap to lighten the load. At just 3.44 lbs (1.56 kg), the Predator gaming utility backpack can be carried via its additional handle. It also includes extra pockets so users can store accessories separately from the laptop and avoid scratches or damage.
2. Predator M-utility backpack
The Predator M-utility backpack comfortably fits 17 inch (43.28 cm) laptops and features a shoulder strap, a carrying handle, a useful waistline buckle, and a padded back to ensure maximum comfort. It is water-resistant and suitable for all weather conditions, with waterproof pockets so users can rest assured their device is safe from unexpected spillages or leaks. The durable Predator M-utility backpack is made from 1680D Ballistic Polyester, so it can withstand wear and tear while traveling. It also includes an additional organizational box so users can keep their accessories tidy and separate from the laptop device.
3. Predator G1 aluminum frame suitcase
Gamers heading to their next gaming event or dream vacation may benefit from the Predator G1 aluminum frame suitcase. The hard exterior shell offers enhanced protection from bumps, while the wheels make it easy to roll to the next party or through an airport. Users can also enjoy additional security with the combination lock, boosting security for expensive gaming laptops and equipment. Alongside the 22 inch (55.88 cm) length, which can snugly fit a 17 inch (43.28 cm) laptop, the Predator G1 aluminum frame suitcase also includes molded foam to fit the desktop, keyboard, mouse, and AC adapter, avoiding scratches and scrapes.
Acer Care and extended warranty
The three aforementioned products come with up to a one-year guarantee for additional peace of mind. Acer extended warranty plans are also available to purchase online, offering users options even when their original standard warranty is running out.
Conclusion
Laptop backpacks are a necessary accessory for users looking to protect their devices while on the go. Gaming laptops and equipment can be pricey, so users must choose a backpack with enough padding and space for accessories. Laptop backpacks also protect against water damage, rain, and accidental spills, so users can travel to gaming sessions, whatever the weather. Acer’s Predator gaming utility backpack, M-utility backpack, and aluminum frame suitcase are perfect for safely transporting gaming laptops in style without worrying about scratches or damage. If you want to protect your gaming laptop, consider one of Acer’s practical backpacks or suitcases and buy yourself peace of mind.
Recommended Products
Predator Gaming Utility Backpack
Buy Now
Predator M-Utility Backpack
Buy Now
Predator G1 Aluminum Frame Suitcase
Buy Now
-
From Code to Canvas: How Stable Diffusion Brings AI Art to Life
In recent years, text-to-image generators powered by artificial intelligence (AI) have revolutionized the way we create and interact with visual content. You type in a description and within seconds, the AI model conjures up an artwork or image matching your instructions. It may seem like magic, but there’s a slew of complex algorithms that make AI image generation possible.
Each text-to-image model works differently, employing its own architecture and techniques to interpret text and produce corresponding images. One such model is Stable Diffusion, which is known for its efficiency and high-quality outputs.
https://www.youtube.com/watch?v=3yEZGnPQ0q4
What is Stable Diffusion?
Developed by Stability AI, Stable Diffusion is an advanced AI model designed to generate images based on textual prompts. It leverages a process called diffusion, wherein it starts with a noisy, random image and progressively refines it into a visually coherent output based on the written input. There are different types of diffusion models. Stable Diffusion uses a specific technique called latent diffusion, which allows it to create high-quality images efficiently. The model works by first encoding a text prompt into a latent space, where it adds and then removes noise to reconstruct an image that aligns with the input description. This process enables Stable Diffusion to produce a wide range of visuals, from photorealistic images to artistic renderings, all based on user-defined prompts.
One of the key advantages of Stable Diffusion is its open-source nature. Users can run it on their PCs without the need for expensive cloud services. This accessibility has fostered a community of users and developers who create tools and enhancements for the model, driving its adoption for various creative and practical applications.
If you rely a lot on Stable Diffusion and other generative AI tools, an AI PC like the Acer Swift X 14 Laptop is ideal. Designed to handle heavier AI workloads, this laptop features an Intel Core Ultra 7 Processor with Intel AI Boost, NVIDIA GeForce RTX 4060 graphics, and a brilliant OLED display—a powerful combination for creative pursuits.
Stable Diffusion vs Other Text-to-Image AI Models
Stable Diffusion is just one of several models powering AI image generators. Other notable examples include Midjourney and OpenAI’s DALL-E. While these three models all utilize diffusion techniques to generate images, they differ in their accessibility, user interfaces, and the types of images they produce.
Both DALL-E and Midjourney are cloud-based models with associated costs for usage. In contrast, Stable Diffusion is open-source and can be deployed on local hardware. This gives it an edge when it comes to accessibility.
Midjourney offers a highly interactive interface through Discord, allowing users to modify various attributes of the generated images in real time. Stable Diffusion and DALL-E are more flexible in terms of scalability and the options to fine-tune or customize the models for specific needs.
As for image quality, DALL-E excels in making accurate semantic interpretations and generating imaginative and intricate images. Midjourney produces some of the best-looking images even without sophisticated prompts, but may not be as consistent as Stable Diffusion in certain scenarios. Stable Diffusion is known for generating sharp and vivid images in various styles and with a high level of consistency.
Some Practical Applications for Stable Diffusion AI
There are many real-world applications where Stable Diffusion’s strengths in AI image generation can enhance creativity and efficiency. For instance, the model can make an impact in education and research. Teachers can use AI-generated visuals to explain complex ideas that may be difficult to illustrate. Researchers can also use AI models like Stable Diffusion to visualize sophisticated data and aid in data analysis.
In entertainment and digital media, Stable Diffusion can be used to produce sketches, storyboards, and concept art, streamlining the content creation process for films, video games, and marketing materials.
Brands can leverage text-to-image AI generators for marketing and advertising. They can create compelling product images, lifestyle scenes, and unique ad campaigns, reducing costs associated with traditional photoshoots while providing a continuous supply of on-brand visual content for campaigns. Meanwhile, product designers can visualize concepts without needing an entire team of illustrators or 3D artists. By typing out their ideas on an AI image generator, they can see rough visualizations come to life in minutes.
All these examples are just a glimpse into the vast potential of AI-powered image generation.
Challenges and Considerations in Using Stable Diffusion
Stable Diffusion and other AI image generators have unlocked new possibilities for transforming various industries, but the use of these models also raises important ethical considerations. One key concern is the potential for biased, explicit, and harmful outputs. Safety filters are implemented in some models to mitigate the risk of inappropriate content, but they are not always entirely effective and users may find ways to bypass them.
There’s also a growing risk of misuse as Stable Diffusion and other generative AI tools become more widely accessible. Misuse includes spreading disinformation and creating deepfakes. The unauthorized use of individuals’ likenesses without consent poses ethical issues like privacy violations. Comprehensive guidelines, regulations, and ethical safeguards can work to ensure responsible usage that benefits society as a whole.
Another major challenge involves copyright, intellectual property, and AI’s impact on artists and the creative industry. These models are typically trained on vast datasets that include images from the internet, many of which may be copyrighted. Since text-to-image AI generators can replicate styles or elements of these images, it raises questions about originality, ownership, and fair use.
These considerations aren’t exclusive to Stable Diffusion. They are challenges that must be navigated carefully as the broader world of AI advances.
Looking Ahead
In February 2024, Stability AI announced the early preview of Stable Diffusion 3. This latest iteration is not just a single model, but a suite of models that range from 800 million to 8 billion parameters. Stable Diffusion 3 features significant improvements in various tasks, such as rendering text and generating multi-subject images. We will undoubtedly see more and more transformative real-world applications as Stability AI continues to innovate in the field of AI-generated imagery and democratize access to models like Stable Diffusion.
Recommended Products
Swift X 14 Laptop
Shop Now
Swift 14 AI Laptop
Shop Now
Aspire Vero 16
Shop Now
About Micah Sulit: Micah is a writer and editor with a focus on lifestyle topics like tech, wellness, and travel. She loves writing while sipping an iced mocha in a cafe, preferably one in a foreign city. She's based in Manila, Philippines.
-
Common Windows 11 Issues and How to Fix Them
Windows 11 has brought a host of new features and a sleek interface to enhance user experience, but like any operating system, it's not without its quirks. From performance slowdowns to connectivity hiccups, users may encounter a variety of issues that disrupt their workflow and enjoyment. In this article, we'll explore some of the most common problems people face with Windows 11 and provide step-by-step solutions to help you navigate and resolve these challenges efficiently.
1. Performance Degradation
Performance degradation in Windows 11 can be frustrating, often caused by increased memory usage or too many startup programs. If many applications are running in the background, the system’s memory usage can spike, slowing down your computer. Similarly, having too many programs set to start automatically can delay system startup and impact overall performance.
To address this, you can start by using Task Manager to close unnecessary programs:
* Open Task Manager (Ctrl + Shift + Esc).
* Identify processes with high CPU or memory usage.
* End these processes to free up system resources.
Additionally, organizing your startup programs can make a significant difference:
* Open the Startup tab in Task Manager.
* Disable unnecessary startup programs.
For advanced users, optimizing system configuration through the msconfig command can help by disabling unneeded services. Running Disk Cleanup is another effective way to delete unnecessary files and free up disk space. Regularly managing running processes and startup programs, along with advanced steps like system configuration and disk cleanup, can significantly improve Windows 11’s performance.
2. Wi-Fi Connection Issues
Wi-Fi connection issues are common in Windows 11, manifesting as disconnections, slow speeds, or the inability to find a network. A straightforward way to fix this is by restarting your router:
* Turn off the router, wait 30 seconds, and then turn it back on.
If the problem persists, running the Network Troubleshooter can help:
* Go to Settings > System > Troubleshoot > Other troubleshooters > Network and Internet (Run)
* Select Run and follow the prompts.
For more persistent issues, resetting the network adapter driver in Device Manager might be necessary, or you can clear the DNS cache by opening Command Prompt and running the command “ipconfig /flushdns.” These steps can often resolve deeper connection issues. Maintaining your Wi-Fi connection also involves ensuring the router is centrally placed in your home with minimal obstructions and regularly checking for firmware updates.
3. Printer Issues
Printer-related problems, such as the printer not being recognized or delays in printing, can disrupt your workflow in Windows 11. Restarting the printer is a simple first step:
* Turn off the printer.
* Wait a few minutes and turn it back on.
If the issue persists, updating the printer drivers can help:
* Open Device Manager.
* Find your printer and update its driver.
You should also check that the correct printer is set as the default in Settings > Devices > Printers & Scanners, and manage the print queue to clear any stuck jobs. For network printers, reinstalling the printer driver from the manufacturer’s website or adjusting network settings, such as restarting the router or reconfiguring the printer’s IP address, might be necessary.
4. Software Compatibility Issues
Windows 11’s latest features can sometimes clash with older software, leading to compatibility issues. If a program isn’t working correctly, try running it in compatibility mode:
* Right-click the program’s executable file.
* Select Properties > Compatibility, and choose an older version of Windows.
Ensuring that both Windows and the software are up-to-date can resolve many compatibility issues. For more complex cases, setting up a virtual machine running an older version of Windows within Windows 11 can allow you to run incompatible programs. Another effective solution is to run the program as an administrator, which can bypass some compatibility restrictions.
5. Registry Optimization
Over time, Windows 11’s registry can become cluttered, leading to performance issues. To optimize the registry, start by creating a system restore point to ensure you can revert changes if something goes wrong. Then, use the built-in Disk Cleanup tool to remove unnecessary files and free up space.
For deeper cleaning, using a trusted registry cleaner tool can help identify and remove outdated or unnecessary registry entries. Advanced users can manually edit the registry by opening the Registry Editor (run “regedit”), but this should be done with caution, as incorrect changes can affect system stability. Optimizing the registry can enhance performance, but always create a backup before making changes, and proceed carefully with any manual edits.
6. System File Checker (SFC) Usage
Corrupted system files can cause various issues in Windows 11. The System File Checker (SFC) is a useful tool to identify and repair these problems. To run SFC:
* Open Command Prompt as an administrator.
* Type “sfc /scannow” and press Enter.
This command will scan your system and automatically repair any detected issues. If SFC is unable to fix certain problems, you might need to use the Deployment Imaging Service and Management Tool (DISM). Running the command “DISM /Online /Cleanup-Image /RestoreHealth” can restore the system image and resolve more complex issues. Using the System File Checker is a straightforward way to fix corrupted system files in Windows 11, with DISM providing additional tools for more thorough repairs.
7. Safe Mode Usage
When Windows 11 encounters startup problems or other significant issues, booting into Safe Mode can be an effective way to troubleshoot. Safe Mode starts Windows with a minimal set of drivers and services, making it easier to identify the cause of problems.
To boot into Safe Mode:
* Go to Settings > System > Recovery.
* Select Restart Now under Advanced Startup. Once Restart Now is initiated, the computer will take you to a blue screen with several options.
* Navigate to Troubleshoot > Advanced options > Startup Settings.
* Restart and choose Safe Mode.
In Safe Mode, if the problem doesn’t occur, it’s likely caused by a driver or software conflict. You can then uninstall problematic programs or adjust settings as needed. Safe Mode is a powerful tool for diagnosing and resolving system issues in Windows 11, providing a controlled environment for troubleshooting.
8. Blue Screen of Death (BSOD)
The Blue Screen of Death (BSOD) is one of the most dreaded errors, indicating a critical system problem. It can be caused by hardware issues, driver problems, or corrupt system files.
Solutions:
* Update Drivers: * Go to Device Manager and check for any outdated or faulty drivers. Update them as needed.
* Run Memory Diagnostics: * Type "Windows Memory Diagnostic" in the search bar, run the tool, and follow the instructions to check for memory issues.
* Check for Disk Errors: * Open Command Prompt as an administrator and run “chkdsk /f” to check for and fix disk errors.
* Uninstall Recently Installed Software: * If the BSOD started after installing new software, try uninstalling it to see if the issue resolves.
Regular system updates and driver management can help prevent BSOD errors. If they continue, it may be necessary to analyze the error code provided on the blue screen to identify specific issues.
9. Slow Boot Times
Slow boot times in Windows 11 can be caused by too many startup programs, a fragmented hard drive, or a need for system updates.
Solutions:
* Manage Startup Programs: * Go to Settings > Apps > Startup and disable unnecessary programs.
* Enable Fast Startup: * Go to Control Panel > Power Options > Choose what the power buttons do > Change settings that are currently unavailable, and enable Fast Startup.
* Defragment Your Hard Drive: * If you’re using an HDD, run Disk Defragmenter by searching for it in the Start menu.
* Check for System Updates: * Ensure Windows is up-to-date by going to Settings > Update & Security > Windows Update.
Optimizing startup programs and keeping your system updated can help improve boot times.
10. Audio Issues
Audio issues in Windows 11, such as no sound or low-quality sound, can stem from incorrect settings or driver problems.
Solutions:
* Check Audio Settings: * Right-click the speaker icon in the taskbar, select “Sound settings,” and ensure the correct output device is selected.
* Update Audio Drivers: * Go to Device Manager, find your audio device, and update its driver.
* Run the Audio Troubleshooter: * Go to Settings > System > Sound, and underneath advanced and next to ‘Troubleshoot common sound problems’ you can select Output devices or Input devices.
* Restart Audio Services: * Open the Run dialog (Windows + R), type “services.msc,” find Windows Audio, right-click, and restart the service.
Addressing these audio settings and drivers typically resolves most sound issues in Windows 11.
11. File Explorer Crashes
File Explorer crashes can be particularly disruptive, often caused by system file corruption, problematic context menu extensions, or outdated software.
Solutions:
* Restart File Explorer: * Open Task Manager (Ctrl + Shift + Esc), find Windows Explorer, and click Restart.
* Clear File Explorer History: * Open File Explorer options, click the Clear button under the Privacy section.
* Run SFC and DISM: * Use System File Checker (SFC) and Deployment Imaging Service and Management Tool (DISM) commands to scan and repair system files.
* Disable Third-Party Extensions: * Use a tool like ShellExView to disable third-party context menu extensions that might be causing conflicts.
Regular system maintenance and careful management of third-party software can help prevent File Explorer crashes.
12. Battery Life Issues (For Laptops)
Poor battery life is a common concern for Windows 11 users on laptops, often due to background processes, high screen brightness, or outdated drivers.
Solutions:
* Adjust Power Settings: * Go to Settings > System > Power & battery, and select a power plan that prioritizes battery life.
* Reduce Screen Brightness: * Lower the brightness through Display settings.
* Update Battery Drivers: * In Device Manager, update the drivers for your battery under the "Batteries" section.
* Close Background Apps: * Use Task Manager to close unnecessary apps running in the background.
Optimizing these settings can extend battery life and improve overall laptop performance.
13. Windows Update Issues
Windows Update issues, such as updates failing to install or causing problems after installation, are not uncommon.
Solutions:
* Run the Windows Update Troubleshooter: * Go to Settings > System > Troubleshoot > Other troubleshooters, and run the Windows Update troubleshooter.
* Clear the Software Distribution Folder: * Open File Explorer and navigate to C:\Windows\SoftwareDistribution, then delete the contents of the folder.
* Reset Windows Update Components: * Open Command Prompt as an administrator and run commands to stop the Windows Update services, delete the qmgr*.dat files, and restart the services.
If update issues persist, you might need to use the Media Creation Tool to reinstall Windows 11.
Conclusion
Navigating an operating system as feature-rich as Windows 11 can occasionally present challenges, but with the right knowledge, these hurdles become manageable stepping stones. By addressing issues promptly—from performance slowdowns and connectivity troubles to software compatibility and system errors—you not only resolve the immediate problem but also enhance your overall user experience. Empowered with the solutions provided, you can keep your system running smoothly, ensuring that Windows 11 remains a powerful tool that works for you, not against you. Embrace these troubleshooting steps as part of your regular maintenance routine, and enjoy a more reliable and efficient computing experience.
Recommended Products
Aspire C22
Buy Now
Swift 14 AI (Qualcomm)
Buy Now
Aspire 15
Buy Now
-
Elevate Your Gaming Experience with the Acer Predator XB273U Monitor
For users on the hunt for a monitor that can keep up with both action-packed gaming sessions and demanding creative workflows, the Acer Predator XB273U is a prime candidate. This gaming monitor packs a punch with its display specs and high-performance features, all at an attractive price point.
These are the specifications of the Acer Predator XB273U (or XB3) Gaming Monitor, specifically the V3BMIIPRX model:
Display: 27-inch WQHD (2560 x 1440) resolution
Panel Type: Agile-Splendor IPS
Refresh Rate: 144Hz using HDMI Port and 180Hz using Display Port
Response Time: 1ms
Brightness: 400 nits in HDR
Connectivity: 1 x DisplayPort, 2 x HDMI 2.0, 1 x Audio Out
Other Features: VESA DisplayHDR 400, AMD FreeSync Premium technology, Acer BlueLightShield
Bringing Games to Life in Brilliant Detail
The Acer Predator XB273U features a 27-inch WQHD IPS display with a 2560 x 1440 resolution and viewing angles up to 178 degrees. This gaming monitor offers exceptional clarity and detail for an immersive gaming experience. Whether you’re exploring intricate landscapes in RPGs, taking down enemies in fast-paced shooters, or admiring the meticulous details in strategy games, the Predator XB3’s sharp visuals pull you deeper into your favorite titles.
Color accuracy is another strong point. The Predator XB273U provides 95% coverage of the DCI-P3 color space, an impressive color gamut that upgrades the visuals for gamers and is also essential for creative professionals and content creators. Additionally, the monitor’s High Dynamic Range (HDR) support delivers a wider range of colors and brighter whites. The resulting contrast and color detail make every frame a visual treat.
Delivering Speed and Precision for Fluid Gameplay
Gamers demand a monitor that can keep up with the lightning-fast action of contemporary games. The Predator XB273U’s 144Hz refresh rate is more than sufficient, ensuring butter-smooth motion and eliminating annoying screen tearing and stuttering. You won’t miss a beat, which gives you an upper hand in the most intense gaming scenarios.
The Acer Predator XB273U also boasts a 1ms response time. A monitor’s response time refers to how long it takes for a pixel to change color. A slower response time can result in ghosting, where faint trails of previous images linger on the screen because the pixels cannot transition quickly enough. This is especially noticeable in gaming monitors with high refresh rates because they have greater demands for quick pixel response. To eliminate ghosting and ensure blur-free visuals, Acer pairs the Predator XB273U’s high refresh rate with a suitably fast response time. Dynamic action is rendered seamlessly, so you can react instantly and dominate your opponents.
Designed to Enhance the User Experience
Acer’s Predator XB273U gaming monitor isn’t just about excellent, reliable performance. It’s also designed with the competitive gamer in mind. The model has a sleek, modern design with thin bezels that minimize distractions and maximize screen real estate. This provides an immersive viewing experience and enables seamless multi-monitor setups. Speaking of various setups, this Predator monitor is VESA mount compatible. You can easily mount it on a wall or a monitor arm to save desk space. Connectivity-wise, the monitor has two HDMI 2.0 ports and one DisplayPort, allowing for multiple connections to PCs, consoles, and other devices.
The XB273U offers several ergonomic adjustments to help you find the optimal viewing position, reducing eye and neck strain especially when you’re settling in for several hours of work or gaming. You can tilt the screen from -5° to 20°, swivel it 20° to the left and right, and adjust the height up to around 4.5 inches.
The Verdict: A Worthy Contender for Gamers and Creators
Even in a gaming monitor category with plenty of impressive options, the Acer Predator XB273U stands out with its potent combination of performance, features, and value. Because of its 144Hz to 180Hz refresh rate and 1ms response time, this monitor delivers an immersive and ultra-responsive gaming experience that will satisfy both casual and competitive gamers. Its excellent color accuracy and HDR support further enhance the overall viewing experience, making it a versatile choice for artists, creators, and media enthusiasts. For anyone seeking a top-notch viewing experience, the Acer Predator XB273U gaming monitor is a worthy contender.
Do you want a convenient way to receive Acer product guides, gaming tips, AI news, and more? The Acer Corner Email Digest is a weekly summary of our latest articles, and you can tailor it to your preferred topics. Sign up here.
Recommended Products
Predator XB3
Gaming Monitor
Shop Now
Predator XB3
Gaming Monitor
Shop Now
Predator XB3
Gaming Monitor
Shop Now
About Micah Sulit: Micah is a writer and editor with a focus on lifestyle topics like tech, wellness, and travel. She loves writing while sipping an iced mocha in a cafe, preferably one in a foreign city. She's based in Manila, Philippines.
-
Top Ten Honkai: Star Rail Characters for Version 2.5
With the release of Honkai: Star Rail version 2.5 on September 9th, the game brings new content, including the Skysplitter area, a military battleship transformed into the venue for the Luminary Wardance competition on Xianzhou Luofu. The update also adds three new characters—Feixiao, Lingsha, and Moze—each with unique abilities that introduce fresh strategies for team-building. As the game’s roster expands, it’s important to know which characters are worth prioritizing. This top ten character tier list breaks down the best choices in the current meta, helping you make informed decisions as you adjust your team for version 2.5.
1. Feixiao
https://www.youtube.com/watch?v=NYOkcSlmjDE
As one of the three newest characters introduced in Version 2.5, Feixiao is a must-include in your team. Her incredible versatility and high damage output make her an essential addition to any lineup. As a dual DPS unit with a focus on follow-up attacks, Feixiao excels in teams that rely on triggering follow-up abilities, significantly boosting your team's overall damage. Her skill not only deals damage but also grants a strong attack buff, keeping her power elevated for several turns. Even when it's not her turn, her follow-up attacks ensure that her DPS remains consistent.
What makes Feixiao truly unique is her ultimate, which charges based on the actions of her allies, allowing it to be used more frequently than other characters' ultimates. It delivers multiple powerful hits and works seamlessly with her follow-up mechanics, making her a DPS machine, especially in boss fights and situations with high DPS requirements.
Feixiao’s kit scales incredibly well with crit damage and ultimate-boosting relics, making her an ideal candidate for damage optimization. Whether you're focusing on raw damage or maximizing her synergy with follow-up attacks and ultimates, Feixiao brings unmatched versatility and power to your build.
2. Jing Yuan
https://www.youtube.com/watch?v=YyCOxxBkPTI
Jing Yuan is a Lightning element character known for his exceptional area-of-effect (AOE) damage, making him the go-to choice for battles involving multiple enemies. As a member of the Erudition Path, Jing Yuan specializes in crowd control, using his skills to unleash powerful attacks that hit all enemies on the field. His unique ability to summon a companion that adds to his AOE damage further enhances his effectiveness. Jing Yuan shines in team compositions that include buffers like Bronya and Tingyun, who can amplify his already substantial damage output, making him a central figure in the game's meta.
3. Bailu
https://www.youtube.com/watch?v=g2ciwy6nxTY
Bailu is a Lightning element healer from the Abundance Path, revered for her unparalleled healing abilities. She plays a crucial role in keeping her team alive during challenging battles, especially in content that demands high sustainability. What sets Bailu apart is her unique ability to revive a fallen ally once per battle, providing a safety net that can turn the tide in difficult situations. Her healing is both potent and versatile, making her an essential component of any team focused on survival. Bailu’s role as a top-tier healer has made her indispensable in the game’s current meta.
4. Seele
https://www.youtube.com/watch?v=lXVQmHxAnAE
Seele, a Quantum element character from the Hunt Path, is a powerhouse when it comes to single-target damage. Her skills are designed to deal high burst damage, particularly through critical hits, allowing her to quickly eliminate key enemies. One of her standout features is the ability to gain extra turns after defeating an enemy, enabling her to chain attacks and swiftly clear waves of opponents. Seele’s speed and damage output make her a favorite for players who need to eliminate threats quickly and efficiently, solidifying her place as one of the most reliable damage dealers in the game.
5. Clara
https://www.youtube.com/watch?v=NycY_n-0M8M
Clara is a Physical element character from the Destruction Path who excels as a counter-attacker, turning enemy aggression into powerful retaliatory strikes. Her defensive capabilities allow her to absorb damage and respond with devastating counters, making her both a tank and a damage dealer. Clara’s versatility shines in team compositions that focus on endurance and sustained damage, particularly in scenarios where she is frequently targeted by enemies. Her ability to deal consistent, high-impact damage while maintaining her durability makes Clara a cornerstone in many effective team setups.
6. Topaz & Numby
https://www.youtube.com/watch?v=Vf8xtB9k9Ws
Topaz & Numby, representing the Fire element in the Preservation Path, are standout characters for their ability to enhance additional attacks. Their role as supportive damage dealers allows them to amplify the output of characters like Clara, making them key contributors in maximizing team damage. Despite being damage-focused, they also offer some defensive benefits, making them a well-rounded choice for various team compositions. Their synergy with other characters who benefit from additional attacks positions Topaz & Numby as a strategic asset in battles requiring both offense and defense.
7. Himeko
https://www.youtube.com/watch?v=Ye4qk1SW9TE
Himeko, a Fire element character from the Harmony Path, is renowned for her sustained damage capabilities. She is particularly effective in long, drawn-out battles where her consistent output can wear down enemies over time. Himeko’s skills often include effects that control the battlefield, such as area damage or burn effects, making her a versatile damage dealer. Her ability to provide steady damage in various scenarios makes her a valuable asset in team compositions that require a balance of offense and control, ensuring she remains a popular choice among players.
8. Arlan
https://www.youtube.com/watch?v=gKNcJ0Qo-Cw
Arlan, a Physical element character from the Destruction Path, is known for his unique counter-attack mechanic, allowing him to turn the damage he takes into powerful offensive strikes. This ability makes him particularly effective in situations where he is frequently targeted by enemies, as each hit he absorbs can fuel his counter-attacks. Arlan is often paired with support characters like Tingyun to maximize his damage potential, especially in single-target-focused team setups. His high-risk, high-reward playstyle appeals to players who enjoy turning the tables on their opponents with strategic counters.
9. Tingyun
https://www.youtube.com/watch?v=v1wGv9Tj7tw
Tingyun, a Lightning element character from the Harmony Path, is a highly effective support character who specializes in single-target buffs. Her abilities allow her to significantly boost the damage output of key attackers, making her an essential part of any team looking to maximize their damage potential. In addition to her buffing abilities, Tingyun also offers some healing, adding to her utility in various team compositions. Her role as a damage amplifier makes her a critical component in teams that rely on one or two strong damage dealers to carry them through tough battles.
10. Bronya
https://www.youtube.com/watch?v=35z1UZ7tuqE
Bronya, a Wind element character from the Harmony Path, has been a mainstay in the game since its launch, consistently ranking high in usage rates. As a support character, Bronya excels at enhancing the effectiveness of her team, particularly by boosting the performance of primary damage dealers. Her versatility allows her to fit into a wide range of team compositions, making her a reliable choice for players looking to optimize their strategy. Bronya’s ability to support and amplify the power of her teammates has kept her relevant and powerful in the game’s ever-evolving meta.
Conclusion
Honkai: Star Rail version 2.5 has brought notable changes to content and character dynamics, allowing players to rethink their team strategies. With the introduction of powerful new characters like Feixiao, Lingsha, and Moze, alongside a revamped meta, now is the perfect time to assess and optimize your roster. This tier list highlights the top contenders that can help you stay competitive, whether you're looking to boost damage, enhance support, or balance your team’s survivability. As the game evolves, staying informed on the best characters will ensure you're always prepared for the toughest challenges in version 2.5 and beyond.
Recommended Products
Nitro 5
Buy Now
Nitro 16
Buy Now
-
Best Spells in Black Myth: Wukong and Why They Matter
Black Myth: Wukong, the highly anticipated action role-playing game (RPG) based on the classic Chinese novel Journey to the West, has taken the gaming world by storm since its release on August 20, 2024. Developed by Game Science, the game has quickly become a critical and commercial success, with players praising its stunning visuals, engaging combat, and deep exploration of Chinese mythology.
One of the most exciting aspects of Black Myth: Wukong is the incorporation of spells into the protagonist's arsenal. Players take on the role of the Destined One, a formidable monkey warrior. Spells play a crucial role in combat, allowing players to unleash powerful magical attacks, defend against enemies, and even manipulate the environment to their advantage.
Game Overview
Black Myth: Wukong was released for the PlayStation 5 and PC platforms. The reception was overwhelming; it became the second most-played game on Steam within 24 hours of its launch. The beautiful visuals and immersive gameplay make it an ideal choice for PC gamers who have access to high-spec machines like Acer's Predator Orion 5000 Gaming Desktop or Nitro V 16 Gaming Laptop.
The narrative of the Wukong video game follows the journey of the Destined One as he navigates a world steeped in Chinese mythology. Players must battle their way through a variety of environments, from lush forests to treacherous mountains, facing off against a diverse array of enemies and bosses.
https://youtu.be/_mAnlVXtDD8?si=wcPfnSfZqXCA5znx
The core gameplay of Black Myth: Wukong revolves around a combination of melee combat and spellcasting. Players can string together devastating combos using the Destined One's staff, while also strategically deploying spells to turn the tide of battle.
Spells in Gameplay
Spells play a vital role in Black Myth: Wukong, enhancing combat and exploration by providing players with unique abilities to overcome challenges. These magical abilities can enhance attacks or ramp up defense.
There are several types of spells that the protagonist can use. They include:
* Mysticism: Spells cast on an object or target to freeze an enemy in place, make martial arts moves stronger, or recover health faster.
* Transformations: Spells that change the Destined One into a different creature or object and allow him to absorb their abilities and properties. For example, with the Dark Thunder spell, the Destined One becomes a horse guai that's immune to thunder, possessing the ability to attack the enemy with lightning and thunder.
* Alteration: Defensive spells allowing the Destined One to become invisible or rocklike.
* Strand: Spells using the Destined One's hair to aid him in battle.
Best Spells in Black Myth: Wukong
Immobilize
https://youtu.be/szXcVBwndws?si=HTmuLsAjsVT8AhXX
Immobilize is a crucial tool for controlling the battlefield. When cast, it freezes enemies in place for a short duration, rendering them vulnerable to follow-up attacks. This Mysticism spell is particularly effective against exhausted, staggered, or downed foes, but it can also be a big help in boss fights. It's bestowed by the Keeper of Black Wind Mountain while the Destined One is fighting the Bullguard boss in Chapter 1. Its strategic use can turn the tide in challenging encounters, allowing players to focus on taking down enemies while minimizing incoming damage. Overall, Immobilize serves as a foundational spell for any player’s arsenal.
Red Tides
https://youtu.be/Cq0UteON8n0?si=IunxvJMk8mvRBCgc
The Red Tides spell in Black Myth: Wukong is a powerful Transformation spell that allows the Destined One to become a wolf guai. To obtain it, players must defeat Guangzhi in the Forest of Wolves in Chapter 1. This spell enables the protagonist to perform strong, heavy attacks and inflict Scorch Bane on enemies with each hit. The moveset includes fast slashing attacks, dash attacks, and powerful slams after dodging. In battle, Red Tides is invaluable for its potentially devastating damage output, making it a formidable tool against tough opponents. The spell's visual effects are striking, adding to the overall experience.
A Pluck of Many
This Strand spell creates duplicates of the Destined One from strands of his hair, aiding in combat by attacking enemies, or allowing him to escape. The duplicates' duration, damage, and health can be enhanced through various perks. This spell is particularly useful for overwhelming enemies and providing strategic advantages in battles. It can be acquired from the Headless Monk at the Yellow Wind Formation's Windseal Gate.
Spell Binder
https://youtu.be/GA0FZTzETmI?si=JyfI5JNIsJWlLnAB&t=84
Spell Binder is a Mysticism ability obtained by defeating the Green-Capped Martialist boss during the Treasure Hunter questline in Chapter 3. When activated, it prevents the Destined One from using any other spells, soul skills, or vessels. Another caveat is that it depletes mana significantly. However, these drawbacks are worth it because the spell drastically increases melee attack power, speed, and damage, and provides higher chances of critical hits. It's invaluable for subduing tough enemies and can be a game-changer in boss fights.
Azure Dome
https://youtu.be/L4u_9E-4y2Q?si=_cTe-fC_ht1jZFDj
This powerful Transformation spell turns the Destined One into a stone monkey who’s immune to Shock and Poison. In combat, the Azure Dome provides resistance to debilitating effects, enhances attacks with absorbed elements, and allows the continued use of spells, making it versatile in various combat scenarios. To obtain it, complete Erlang's questline by defeating certain bosses including Erlang Shen.
Life Saving Strand
The Life-Saving Strand spell in Black Myth: Wukong is a crucial defensive ability that automatically activates in moments when the Destined One is in mortal danger. The spell transforms a strand of his hair into a duplicate that takes the fatal hit, simultaneously creating a new body for him with full health, but without replenished healing items. It provides a second chance in battle, making it invaluable for surviving tough encounters. To obtain it, you need to finish the game once and start playing again in New Game+ mode. Visit the first shrine in Black Wind Mountain to unlock the spell.
Ashen Slumber
https://youtu.be/GLcSqHvnwww?si=_fSQoyu_lcZViemP
This is a formidable Transformation ability, perfect for dealing with hordes and dealing sustained damage over time. It transforms the Destined One into a rat guai, enabling slashing attacks and fierce flame blows that inflict Scorch Bane. It includes a heavy attack that continuously burns enemies and a self-destruct attack for area damage. One way to acquire it is to complete the Two-Headed Rat Guai quest, which involves going to Sandgate Village and the Pagoda Realm, and defeating the yaoguai chief Captain Lotus-Vision.
Collector's Edition and Additional Content
For fans who want to take their Black Myth: Wukong experience to the next level, the game's collector's edition offers a wealth of additional content. This special edition includes a variety of physical collectibles, such as a high-quality figurine of Sun Wukong, as well as in-game items like exclusive armor sets and weapons.
Looking to the future, it's likely that Game Science will continue to support Black Myth: Wukong with additional content updates and expansions. These could include new areas to explore, enemies to battle, and spells to acquire, further expanding the game's already impressive scope.
Subscribe to the Acer Corner Email Digest for access to the latest gaming and tech news, product updates, and special offers.
Recommended Products
Predator Orion 5000
Gaming Desktop
Shop Now
Nitro V 16
Gaming Laptop
Shop Now
Predator Helios 18
Gaming Laptop
Shop Now
About Lalaine Capucion: Lalaine has been working as a freelance writer and editor for more than 12 years, focusing on lifestyle, travel, and wellness. When she isn’t writing, she's most likely curled up with a good book or trying out a new recipe in the kitchen. She lives in Metro Manila, Philippines.
-
How to Rollback a Windows 11 Update
Windows 11 updates are designed to improve system performance, security, and functionality. However, not all updates go smoothly, and sometimes they can cause unexpected issues or compatibility problems. Whether it's performance degradation, software bugs, or hardware conflicts, rolling back a recent Windows 11 update may be necessary. In this guide, we'll walk you through the steps to revert to a previous version of Windows 11 and resolve any problems caused by the latest update.
Why would you want to rollback to a previous version of Windows 11?
While Windows updates are generally aimed at improving system performance, security, and adding new features, they don’t always work out as intended for every user. In some cases, an update can cause more harm than good, leading to various issues that disrupt your workflow, gaming experience, or daily computing. When these problems arise, rolling back to a previous version of Windows 11 can be a practical solution. Below are some common reasons why users might choose to revert to an earlier version of the operating system:
* Performance degradation: After an update, you may notice your system running slower than before, with longer boot times, lag, or overall reduced responsiveness.
* Software and hardware compatibility issues: A new update might interfere with certain applications or hardware devices, leading to malfunctions or incompatibility with drivers.
* Introduction of new bugs: Updates sometimes introduce bugs that can cause crashes, freezes, or other unexpected problems that were not present before the update.
* Loss or changes to key features: Some updates alter or remove features you’ve come to rely on, affecting your workflow or user experience.
* Security or privacy concerns: In rare instances, an update might introduce new vulnerabilities or change privacy settings in ways that concern users.
What are the risks associated with rolling back your update?
While rolling back a Windows 11 update can help resolve issues caused by the latest version, it’s important to be aware of the potential risks involved. Reverting to a previous version may not always be a perfect solution, and it can sometimes create new challenges. Here are some of the risks to consider before deciding to rollback your update:
* Loss of Security Updates: Rolling back to a previous version may remove critical security patches included in the latest update, potentially leaving your system more vulnerable to malware or cyberattacks.
* Loss of New Features: By reverting to an earlier version, you’ll miss out on any new features or improvements introduced in the latest update. This might affect your ability to use certain functions or software that require the latest version of Windows.
* System Instability: While rolling back can fix certain issues, it may also introduce instability or bugs from the earlier version of the operating system, which had been addressed in the most recent update.
* Incompatibility with New Software or Drivers: Newer software, drivers, or hardware might not function properly with the rolled-back version of Windows, especially if they rely on features or updates from the latest release.
* Temporary Data Loss or Settings Reset: In some cases, rolling back may affect system settings, personalization options, or installed software. While Windows usually retains user data, there’s a risk of losing recent changes or configurations.
* Limited Time Window: Windows allows users to rollback updates only within a limited period (typically 10 days). After this time, the option may no longer be available, meaning you'll be stuck with the update unless you perform a more involved downgrade or system restore.
By understanding these potential issues and risks, you’ll be better equipped to determine whether rolling back a Windows 11 update is the right choice for your system.
How to rollback a Windows 11 update
If you’ve decided that rolling back your Windows 11 update is the best solution to resolve any problems, there are several methods available to do so. Depending on your system's state and the severity of the issues you're facing, you can choose from four different ways to rollback the update:
* Settings menu: The simplest and most commonly used method when your system is functioning normally.
* Advanced Startup (Safe Mode): Useful if you're unable to access the system normally due to more severe issues.
* System Restore: This option is available if you created a restore point before the update.
* Manually uninstalling specific updates: This method allows you to remove individual updates through the Control Panel.
Below, we’ll explain each method in detail to help you choose the one that best suits your needs.
1. How to rollback a Windows 11 update using the Settings menu
* Open the Settings app
Click the Start button and select Settings (gear icon), or press Windows + I to open it directly.
* Navigate to Windows Update
From the left-hand menu in the Settings window, click on Windows Update.
* Open Update history
Click on Update history to see the list of installed updates.
* Go to Recovery options
At the top of the Update history screen, you’ll find the Recovery options link. Click on it.
* Click "Go back"
Under the Go back section, click the Go back button (if available).
* Provide a reason
Choose a reason for rolling back the update, then click Next.
* Review warnings
Review any warnings that appear and click Next again.
* Skip additional updates
If prompted to check for additional updates, select No, thanks.
* Start the rollback
Click Go back to earlier build to initiate the rollback process.
* Complete the rollback
Your system will restart, and Windows will revert to the previous version. Wait for the process to complete.
If the "Go back" button isn’t available, you can try using System Restore, which restores your system to a previous state before the update (if a restore point was created).
Note: The "Go back" option is only available within 10 days of the update. After this period, Windows deletes the previous version files to free up space. Additionally, if you've used a system cleanup tool or manually removed old files, the option might not appear.
2. How to rollback a Windows 11 update using System Restore
If the "Go back" option isn't available, you can use System Restore to revert your system to a previous state before the update. However, it's important to note that System Restore needs to have been enabled on your system beforehand, and a restore point must have been created for this method to work.
Steps to rollback using System Restore:
* Open the System Properties window
Press Windows + S and type Create a restore point. Click on the top result to open the System Properties window.
* Open System Restore
In the System Properties window, click on the System Restore button to launch the System Restore wizard.
* Select a restore point
You will see a list of available restore points. Choose the one that was created before the problematic update was installed. You can also click Scan for affected programs to see which apps or drivers may be removed as part of the restore process.
* Confirm the restore point
After selecting the restore point, click Next and confirm your choice by clicking Finish. This will begin the rollback process.
* Wait for the restore to complete
Your computer will restart, and Windows will restore the system to the chosen restore point. This process can take several minutes depending on your system's configuration.
Note: System Restore will not affect your personal files, but it may remove apps, drivers, or system settings that were installed after the restore point was created.
How to create a restore point in Windows 11:
It’s a good idea to proactively create restore points, especially before installing major updates or making significant system changes. Here’s how:
* Open System Properties
Press Windows + S, type Create a restore point, and click the top result.
* Select the drive to protect
In the System Properties window, under Protection Settings, select your system drive (typically C:) and click Configure.
* Enable system protection
In the pop-up window, select Turn on system protection and adjust the Max Usage slider to allocate space for storing restore points. Click Apply to confirm.
* Create a restore point
Back in the System Properties window, click Create. Provide a descriptive name (e.g., "Before major update") and click Create.
* Complete the process
Windows will create the restore point. Once complete, click Close to finish.
By creating regular restore points, you'll be prepared for future system issues, ensuring you can easily rollback to a previous state if needed.
3. How to rollback a Windows 11 update using Advanced Startup (Safe Mode)
If your system is unstable after an update and you cannot access Windows normally, you can use the Advanced Startup (Safe Mode) to roll back the problematic update. This method is particularly useful when severe system issues prevent regular booting.
Steps to rollback using Advanced Startup:
* Access Advanced Startup
Hold the Shift key while selecting Restart from the Start menu or the Lock screen.
* Navigate to Troubleshoot
On the recovery screen, select Troubleshoot.
* Uninstall updates
From the Advanced options menu, select Uninstall Updates. You will be presented with two options: * Uninstall the latest quality update (for smaller updates like security patches).
* Uninstall the latest feature update (for major updates that introduce new features).
* Follow the on-screen instructions
Select the appropriate option and follow the prompts to confirm the rollback. Your system will restart and remove the selected update.
This method allows you to rollback even when your system is experiencing serious issues.
4. How to rollback a Windows 11 update by uninstalling specific updates via the Control Panel
If you're facing issues with a specific Windows update, you can manually uninstall it through the Control Panel. This method allows you to target individual updates that might be causing problems, without relying on broader rollback features. Here's how to uninstall specific updates:
Steps to uninstall updates using the Control Panel:
* Open Control Panel
Press Windows + S and type Control Panel. Select it from the search results.
* Go to Programs and Features
In the Control Panel window, click on Programs, then select Programs and Features.
* View installed updates
On the left-hand side of the Programs and Features window, click View installed updates.
* Select the update to uninstall
You will see a list of installed updates. Locate the update you want to remove. Updates are listed by their KB (Knowledge Base) number, which can help you identify the one causing issues.
* Uninstall the update
Right-click on the specific update and select Uninstall. Confirm when prompted. Windows will then proceed to remove the update from your system.
* Restart your computer
Once the uninstallation process is complete, restart your computer to apply the changes.
By using the Control Panel, you can precisely manage which updates are affecting your system and remove only the problematic ones.
Conclusion
Rolling back a Windows 11 update can be necessary when an update causes performance issues, compatibility problems, or introduces bugs that disrupt your system. Depending on the situation, there are several options to address these issues. The settings menu offers a straightforward approach when your system is still operational, while advanced startup is helpful if you're unable to access Windows normally. System restore provides another safeguard, allowing you to return to a previous working state if a restore point was created beforehand. Lastly, manually uninstalling updates via the control panel lets you remove specific problematic updates without a full rollback.
If you're unfamiliar with these processes or feel unsure, it's always best to consult a professional to avoid accidental data loss or further system issues. For more help and support, visit Acer's official support page. Understanding these methods gives you more control over maintaining your system's stability and performance when updates don’t work as expected.
Recommended Products
Aspire C24
Buy Now
Aspire C27
Buy Now
