Predator P03-600 GPU size found a evga 2080 super ftw3 that's about 12inches long.

Signex
Signex Member Posts: 19 Troubleshooter
edited September 22 in Predator Desktops

Hello, I'm upgrading GPU, what size will fit? I found a evga 2080 super ftw3 that's about 12inches long. I previously had a 10.5inches long.

[Edited the topic title to include the topic issue.]

Answers

  • billsey
    billsey ACE Posts: 34,645 Trailblazer

    You will have to open it up and measure, the SG doesn't give good enough dimensions to see what fits and what doesn't.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • StevenGen
    StevenGen ACE Posts: 12,500 Trailblazer

    The PO3-600 is fitted with an oem RTX2070 that should be the same size as the EVGA RTX2080 GPU, but measure the distance that you have inside the case as the EVGA RTX2080 that you want should have the dimensions of the card on the EVGA page.

    Measure this distance inside your PO3-600 case where the red markings are below of how thick the EVGA card is and if it will fit btween the PCI X16 slot and the end of ram module as the length of the gpu will fit.

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍

  • Signex
    Signex Member Posts: 19 Troubleshooter
  • Signex
    Signex Member Posts: 19 Troubleshooter

    I'm getting a other card I bought it along with a pcie riser cable so I can let it sit outside the case if it won't fit. The dimensions are: L=290 W=134.31 H=59.9 mm

    I measured around 299mm length inside the case, I'll try it but won't damage the card if it won't go easy.