Trouble in recognizing Samsung SSD in Aspire XC 1600

OveHansen
OveHansen Member Posts: 2 New User

ORIGINAL TEXT :

Jeg har en Acer Aspire xc 1660 Computer.
Jeg har købt en Samsung Ssd Harddisk 980 pro 1 tb
Jeg kan ikke få computeren til at genkende Harddisken.
Jeg kan forstå at jeg skal opdatere bios med en driver
så harddisken kan genkendes.
Samsung har en opdatering til dette.
Problemet er at bios nægter at starte op fra ext usb
drev med opdateringen på.
Hvad gør jeg.

TRANSLATION :

I have an Acer Aspire xc 1660 Computer. I have bought a Samsung Ssd Harddisk 980 pro 1 tb I cant get the computer to recognize the Hard Drive. I understand that I have to update the bios with a driver so that the hard drive can be recognized. Samsung has an update for this. The problem is that the bios refuses to boot from ext usb drive with the update on. What do I do.

[The message was translated using Google Translation]

[Edited the thread to add model name and issue detail to the title]

Answers

  • Puraw
    Puraw ACE, Member Posts: 14,021 Trailblazer
    edited July 11

    Slottet er M.2 PCIe 3x4 til en Gen3 SSD som Samsung 970 Evo Plus 1TB, 980Pro er en Gen4 SSD, men burde fungere i det slot ved halvdelen af ​​hastigheden. Måske er der en strømbegrænsning for Gen4 SSD'er. Tjek også, om AHCI Sata-tilstand er indstillet i BIOS. Jeg anbefaler, at du holder dig til BIOS-version R01-A3.
    Translated: The slot is M.2 PCIe 3x4 for a Gen3 SSD like the Samsung 970 Evo Plus 1TB, 980Pro is a Gen4 SSD but should work in that slot at half the speed. Maybe there is a power limitation for Gen4 SSDs. I recommend you stick with BIOS version R01-A3.

  • Larryodie
    Larryodie Member Posts: 1,738 Community Aficionado WiFi Icon

    SET Boot Enable to ENABLED in bios to boot from USB .

  • OveHansen
    OveHansen Member Posts: 2 New User
    edited July 19

    ORIGINAL

    jeg har prøvet

    Det er lykkes at starte op fra usb

    har indstalleret driveren fra samsung

    til 980 pro.

    Men intet resultat.

    Ssd disken kommer ikke frem

    Jeg prøver nu om jeg kan indstallere bios-version R01-A3

    Takker for forslagene 😁

    TRANSLATED

    I have tried Booting from usb succeeded have installed the driver from samsung to 980 pro. But no result. The ssd disk does not appear I am now trying to see if I can install bios version R01-A3 Thanks for the suggestions 😁

    [Translated using google]

  • Larryodie
    Larryodie Member Posts: 1,738 Community Aficionado WiFi Icon

    I'm wondering if you added this SSD as you may have to disconnect the old drive and boot with only the new SSD is recognized alone then reconnect your old hard drive.

    I assume that the new drive has been cloned ???