My X138WH projector won’t boot up

DMarriott
DMarriott Member Posts: 2 New User

my projector doesn’t power up properly. The blue led comes on but nothing else happens until it times out & goes in to standby with a red led. Any ideas?

Answers

  • Axxo
    Axxo Member, Ally Posts: 925

    Most likely scenario is, check your lamp door. Does it feel that it is not sitting properly? Like is it springing out a bit when you press it?
    If yes, then the tab on that door may be broken. You can open it and see if it is.
    Now what that does is, it fails to push the switch inside.
    If you press the door by hand and the red light comes on, that is your problem. Just secure it with a tape of something so that it keeps pushing that switch. Hope this is the problem you have.

  • DMarriott
    DMarriott Member Posts: 2 New User

    Thanks for the message. Unfortunately, this isn’t the issue as the switch appears to be working fine. I’ve changed the bulb & it’s not that either. Any more thoughts?