Predator G3-710-UW11 RAM Dual problem. Whenever I try to run same RAMs in Dual slots just beeps

Hello,

I have a problem with running RAMs in Dual mode. I have the Predator G3-710-UW11 (exactly like this - https://www.newegg.com/acer-predator-g3-ag3-710-uw11/p/13N-0059-00002 ).

By now I have bought about 8 different 8GB RAM sticks (same DDR Mhz etc. as the one my computer came originally with - RAMs were bought always as identical - last time as an official dual pack by Crucial but even those don't work) to try to run them in Dual, but all I can use is 16GB in slots 3&4 or 1&2 (or 1&4 / 2&3).

Whenever I try to run same RAMs in Dual slots (1&3 / 2&4) the MB just beeps on startup and nothing is loading up.

Does anybody have same experience and perhaps suggestions of what I can do to try to fix this?

I have the BIOS R01-A04.

I'm trying to run 24GB of RAM (2x8GB in dual + original 8GB that the computer came with).

Thank you for any help and advice in advance!

All the best,
Mike

[Edited the thread to add model name to the title]

Accepted answers

All comments

Puraw

https://community.acer.com/en/discussion/701725/predator-g3-710-uw11-ram-dual-problem-whenever-i-try-to-run-same-rams-in-dual-slots-just-beeps

Fill all the slots with the max. allowed memory per slot, install the 2 x 8GB in slots 1 + 2 and 2 x 4GB in slots 3 + 4 for 24GB total RAM.

StevenGen

https://community.acer.com/en/discussion/701725/predator-g3-710-uw11-ram-dual-problem-whenever-i-try-to-run-same-rams-in-dual-slots-just-beeps

Below is the G3-710s desktops SG memory specs and all the information on memory for this desktop. The link to the G3-710 that you provided quotes that desktops memory at DDR4-2133Mhz type, so use that type of ram or the ram specified below as it should work 100% into the G3-710s desktops 4x DIMM slots. Good luck and hope this helps you out.