aspire R3-131T-P02Q ssd/hdd invisible to windows 10

Sconaus
Sconaus Member Posts: 2 New User

good evening, my hdd broke and since i had to replace it i got an ssd from sandisk specifically 1tb ultra version. having no beckup i downloaded win 10 put on the usb stick, at the time of choosing the destination of windows ssd it is not seen, i thought about a non compatibility so i got an old toshiba hdd but that too was not recognized. I can't figure out what the problem is.

Answers

  • StevenGen
    StevenGen ACE Posts: 11,985 Trailblazer

    Seeing that the Aspire R3-131T hasn't got an IRST driver follow the procedure below and check if after the disk appears in the continue installation.

    First start the Windows installation and go to the screen to select the installation location, after that perform the procedure below.

    1. Press SHIFT+F10 to open the command prompt;
    2. Type the commands below and at the end of each one press Enter:

    diskpart
    list disk
    select disk 0 (Change the number 0 by the number of the disk where you want to install Windows as listed in the previous command)
    clean
    create partition primary
    exit
    exit

    3. Click Update and you will see that a new partition has been created on the disk;
    4. Select the partition and proceed with Windows installation.

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍

  • Sconaus
    Sconaus Member Posts: 2 New User

    Meanwhile, I thank you very much for the support. Unfortunately the 'only disk it sees is the one on the usb stick where windows is installed. At this point there are two things, either it is the cable, or it does not see ssd, maybe it is not compatiblile ?!