Nitro AN515-54 fan does not slow down.

Foller
Foller Member Posts: 1 New User

Since I have have bought this laptop, the fan does not slow down after a hard load, the only way is from restarting the windows. Even on bios the laptop fan starts to fly.

the temperature is low, GPU is on 45-50 degrees CPU is 40 - 55 degrees.

i have already made a clean windows installation.

I have already clean the fans and changed the thermal paste.

have already updated the bios to latest version. 1.33, have already clean the bios

also have installed installed Acer nitrosense, changed the configuration to low energy, put it back to performance. Have activated and deactivate turbo boost for the fan. I have tried to put a fixed value for the fan speed in the custom fan control in the nitrosense but the fan does not slow down, the fan speed is being recognized by the nitrosense.

The only time that he slows down is wen I activate the turbo boost, then he stops the fan and slow go up to the maximum.

Answers

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,641 Pathfinder

    @Foller

    If you have two SSDs installed, the fans might take longer to slow down because of the PCH chipset temperature. The solution is to disable the ethernet driver if you don't use it or put a heatsink on the PCH chipset.

    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!