Unable to install win10 on acer S7-391-53314G12aws

McDulle
McDulle Member Posts: 4 New User

Try to follow me in my quest to resurrect this beautiful pc.

Hard-drive is a single M2 LITE-ON 128Gb ssd

Win10 OS original downloaded from Microsoft site

The pc comes installed with win8, which I want to upgrade to win 10.

I've tried to install win10 using Ventoy, the installation failed on the final part resulting in a fallback recovery to win8.

During boot, the raid option comes up. Intel Raid ROM 11.5.0.1582

Figured if I remove the raid configuration the system doesn't have a fallback option to win8 anymore. So I removed the raid config, warning me about the loss of data. Created a new raid config.

It seems, I've lost the ability to use any usb ports to install any media?!?

So no option anymore to install the OS. I tried to setup a PXE server, no luck there either, as of a sudden not a single boot option seems to work anymore. Even the boot screen flashes so rapid not able to get into BIOS either. So every boot attempt results in: No bootable device found please enter bootable device and hit ect …

Thinking about the issue I figured if I buy a USB to M2 adapter I'm able to bypass everything and copy the installation files to the hard-drive directly. So bought the adapter, slaughtered the laptop put everything in my pc and???

My pc only recognizes 59Gb of the 128Gb SSD, tried diskmanagement, diskpart even tried some freeware to test its promises it doesn't see the second part. I'm able however to format, allocate, copy win10 on the half of the ssd. Tried to boot the half, entering the raid option it recognizes its second half is 'corrupt' giving me the option to repair it, ON BOOT of the operating system which it can't.

In a final attempt sacrificing speed I've configured the drive in RAID 0 giving me the full 128Gb of space, put the SSD in my pc, it only 'sees' half of the SSD…

Did I brick the laptop? Or are there any tips or solutions left to try?

Answers