Acer Predator Orion 5000 (PO5 - 640) (Won't Boot When Display Port Connected)

LukeyBoy7
LukeyBoy7 Member Posts: 2 New User
edited December 2023 in Predator Desktops

Hi I don't know if anyone can help me, but my computer wont boot when the display port is connected to my monitor.

I have the following spec's:

Preditor Orion 5000 (PO5 - 640)

Processor - 12th Gen Intel ® Core ™ i7 - 12700

Memory - 16GB Standard RAM

Graphics Device - NVIDIA GeForce RTX 3080

All drivers are up to date.

Display - Samsung Neo G7 (I have also updated the software for the monitor)

The issue I am having is that when my display port is connected to my desktop (straight into the graphics card) and the display is set to DP 1.4 the computer wont boot, I have switched the DP cable out to a new UGreen 1.4 display cable and I have also tried every single port to make sure it wasnt a faulty wire or port. The only way I can get this to boot is the following:

  1. Switch the display setting on the monitor to DP 1.1 before turning on computer, i can then change the display back to 1.4 once it has booted and it works fine.
  2. Unplug the display cable when booting, as soon as I hear the beep I can plug the display cable back in and it works fine.

This is just a pain having to do this everytime, and I was wondering if there is a way to sort this so i dont have to keep doing the above?

Thanks Luke

[Edited the thread to add issue detail]

Best Answer

  • GotBanned
    GotBanned Member Posts: 654 Seasoned Specialist WiFi Icon
    Answer ✓

    It could be that THIS helps. Below is some of the text from the link.

    "The DisplayID specification provides enhanced display capabilities. To ensure compatibility with monitors using DisplayID, an update to the NVIDIA GPU firmware may be required.

    Without the update, systems that are connected to a DisplayPort monitor using DisplayID could experience blank screens on boot until the OS loads. This update should only be applied if blank screens are occurring on boot[...]"

Answers

  • StevenGen
    StevenGen ACE Posts: 12,528 Trailblazer

    Try a HDMI cable as that is how the Samsung Neo G7 should be connected, you must have an issue with the DP port from the gpu so simplify the connection with an HDMI cable.

  • billsey
    billsey ACE Posts: 34,697 Trailblazer

    Try running updates on the 3080 drivers. I have a hard time imagining just what could go wrong in the hardware to cause those symptoms. If it were an issue with the physical port you wouldn't see it on all DP ports. It's possible it is some sort of incompatibility with the Samsung monitor, but I would expect that would generate a lot of complaints. The Nvidia is pretty much the standard for GPUs.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • GotBanned
    GotBanned Member Posts: 654 Seasoned Specialist WiFi Icon
    Answer ✓

    It could be that THIS helps. Below is some of the text from the link.

    "The DisplayID specification provides enhanced display capabilities. To ensure compatibility with monitors using DisplayID, an update to the NVIDIA GPU firmware may be required.

    Without the update, systems that are connected to a DisplayPort monitor using DisplayID could experience blank screens on boot until the OS loads. This update should only be applied if blank screens are occurring on boot[...]"

  • GotBanned
    GotBanned Member Posts: 654 Seasoned Specialist WiFi Icon

    Awesome! Happy to be able to help.