Ram upgrade for Nitro N50 650 Desktop

Gregr2
Gregr2 Member Posts: 2 New User

Hi all, new here and a bit lost as to finding the correct ram upgrade for my rig.

I have been to many sites and have not found my model listed on system scanners or system selectors or QVL lists. Also getting conflicting data regards max ram capacity for the 2 slots, and voltage requirements ie 1.2V or will it run 1.35V sticks DDR4 3200?

Also do I stick with original clock speeds or can they be different on a new pair of sticks?

Am I over thinking this or does it even matter?🙃

Best Answers

  • Puraw
    Puraw ACE, Member Posts: 14,685 Trailblazer
    Answer ✓

    You have 2x 8GB 3200 MHz DDR4 modules installed in the 2 slots (no more slots to upgrade). You are running in Dual Channel mode at maximum clock speed so your RAM cannot go any faster. To maintain this speed but increase your RAM capacity to 32GB you have to replace the 2x8GB with 2x16GB 3200 MHz. IMO I would leave the RAM the way it is now as 16GB is plenty for any program in Windows11 Pro. To check your RAM speed, open Task Manager, Performance, Memory

  • Gregr2
    Gregr2 Member Posts: 2 New User
    Answer ✓

    Thank you for the reply, Puraw your thoughts on the matter make sense.

Answers

  • Puraw
    Puraw ACE, Member Posts: 14,685 Trailblazer
    Answer ✓

    You have 2x 8GB 3200 MHz DDR4 modules installed in the 2 slots (no more slots to upgrade). You are running in Dual Channel mode at maximum clock speed so your RAM cannot go any faster. To maintain this speed but increase your RAM capacity to 32GB you have to replace the 2x8GB with 2x16GB 3200 MHz. IMO I would leave the RAM the way it is now as 16GB is plenty for any program in Windows11 Pro. To check your RAM speed, open Task Manager, Performance, Memory

  • Gregr2
    Gregr2 Member Posts: 2 New User
    Answer ✓

    Thank you for the reply, Puraw your thoughts on the matter make sense.