nitro 5 an515-58...screen problem lines appear on the screen and it starts to slide down

blueangel35
blueangel35 Member Posts: 4 New User
edited September 2023 in Nitro Gaming
When I open and close the screen from the corner, lines appear on the screen and it starts to slide down and stops when I let go. It seems to be happening because the screen casing is stretching, because if I do it slowly, nothing happens. I couldn't understand whether the problem was with the screen, the top case or something else.

[Edited the thread to add issue detail]

Best Answer

Answers

  • Puraw
    Puraw ACE, Member Posts: 13,626 Trailblazer
    edited September 2023

    Opening15"-17" laptop lids at the corners is not recommended as it flexes any panel (even metal lids) and when opening the lid action is set to wake or resume you may get the issue you describe. Large laptop lids have special openings/grips in the MIDDLE enabling to open the lid with only one hand. The hinge assembly and screen will also be detrimentally affected when the lid is opened frequently at the corners putting uneven stress on one side of the screen panel and hinge, definitely not good practice 😑

  • blueangel35
    blueangel35 Member Posts: 4 New User
    Answer ✓
    thank you for the answer. Normally, I open and close the lid from the middle, but when I opened and closed it from the corner a few times, I noticed the problem I described. So, as far as I understand, there is no problem with the screen or cables, right?