My sb220q monitor stopped working.

LucasIDC
LucasIDC Member Posts: 1 New User

It was working, but I stepped out of the room, and it turned itself off. I have tried doing most of the basics, but that blue light will not turn on. How do I fix this?

Answers

  • Jack22
    Jack22 ACE Posts: 4,095 Pathfinder

    @LucasIDC

    Try to change the cables and check.

    If still not working, remove the power cable and press and hold the power button on the monitor for 30 seconds and than connect it back

    Click on 'Yes' if the comment answers your question!
  • Emma_
    Emma_ Moderator, Member Posts: 226 Moderator

    Hello!!

    @LucasIDC

    After plugging the monitor into another power source, check to see if there are any power lights that show. Reset the power to the monitor by removing all power from it. Then press and hold the power button for 30 seconds. Connect the monitor to a power source and turn it on.

    It is possible that the monitor isn't turning on due to a loose or damaged cable connection between your monitor and computer. Carefully check that all connectors are firmly attached. If any look worn or damaged, switch them out for new cables

    Regards,

    LunaNova14