Hello,
I want to upgrade my 250GB ssd SSDPEKKW256G7 INTEL DATASHEET
https://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ssd-600p-brief.pdf
Acording this datasheet this ssd is GEN 3 X4 NVMe SSD 1800MB write / 560MB read So teoreticaly if i will change this disc to some 3500/3000 it should run full speed because GEN3 line supports 1 GB/S * 4 lines = 4GB/S, but after that i found this topic
which says that AN515-52 uses only 2 lines so this connection should be lemited to an half speed which is about 1750/1500 which makes sense. But how it is possible that original INTEL SSD is able to run full speed ~1600MB/450 (measured by cristaldisc on my nitro 5) Is there some special load balancer inside which is able to move all load to thes two lines?
Diference between GEN3 and GEN4 is an frequency so i can use some high tech SSD 7300MB read / 6000MB write but this will be downgreded by GEN3 frequency and two lines. But which speed i can achieve? 2000/2000 acording gen 3 specification?
I also try to checked the PCIe version acording this topic
But there is only sata 3 which is 6Gb/s = 600MB/s but i measured 1600MB/450 so there is somethink bad
Can i somehow increase speed or unlock gen3 X4 please help me i am so confused with this. Thank you.
[Edited the thread to add model name to the title]