Error code 0xc0000185 on my Acer Aspire A715-42G-R4XX it showed up a blue screen.

Kluan
Kluan Member Posts: 5

Tinkerer

edited June 4 in Aspire Laptops

When I turned on my Acer A715-42G-R4XX, I stuck at the screen Acer with error code 0xc0000185 Bl innitializeLibrary failed. After restarted few times, it showed up a blue screen for about 2 sec and then turned off. After showed up blue screen a few times, it is not showed up again. So far, technician has tried to reinstall windows, tried the solutions for the error code on the internet, but it was not change anything. He suspected that the motherboard had problem. Can anyone help me with this, thank you.

[Edited the thread to add issue detail]

Answers

  • StevenGen
    StevenGen ACE Posts: 11,958 Trailblazer

    Error Code 0xc0000185 is caused by a corruption of files related to the boot function of a Windows PC. Specific files have been deleted or damaged somehow, or something as innocuous as a faulty shutdown or a new peripheral is throwing a spanner in the works.

    It could also result from malware or faulty hardware, and this error is merely a symptom of a growing problem.

    How to Fix Error Code 0xc0000185

    Whether this error is the main problem affecting your system or there's another more substantive glitch that this error merely hints at, you can't fix anything until you get your PC working again.

    After you've tried each of these fixes, reboot your system and see if it starts properly. If it doesn't, move to the next potential solution.

    Rebuild the BCD. If this error persists, rebuilding the Boot Configuration Data file is an excellent next step to take. Access the Advanced Startup options menu to begin.

    Rebuild the BCD with boot media. Sometimes, Windows boot problems are difficult to fix because you can't get to the repair tools you need to use. While you could use another Windows install drive, a more straightforward method is creating and using a bootable Windows 10 USB drive. To make one, download a Windows ISO file (it's free) from one of Microsoft's sources, then burn the ISO file to a USB drive.

    Then rebuild the BCD in Windows like you may have done in the last troubleshooting step, but this time, boot to your USB drive rather than your main drive.

    Execute a system restore. If repairing the BCD doesn't fix the problem, a more drastic approach is to roll back the system to a previous point in time. Using a System Restore can delete applications and data, so if you can, back up your data and keep it safe on a secondary drive before continuing. However, you'll need to run the restore from the Advanced Startup options menu because you can't boot into Windows properly.

    Format the hard drive and reinstall Windows. If you still have problems booting your PC after completing the above steps, format the drive and reinstall WindowsMove your data and programs to a new hard drive before doing this because this process wipes the drive.

  • Kluan
    Kluan Member Posts: 5

    Tinkerer

    My technician has tried these solutions but it don't work. He can not access to bios or recovery mode.

    I don't know what "An unexpected error has occurred" describes, there are not much information on internet.

  • Puraw
    Puraw ACE, Member Posts: 12,846 Trailblazer
    edited July 2023

    Bring/send your laptop to Acer Services and ask them to reset the system to factory defaults, if no longer under warranty, Acer will charge a small service fee, in the Philippines $25.

  • Kluan
    Kluan Member Posts: 5

    Tinkerer

    I will try that.

    Thanks for your support.

  • Kluan
    Kluan Member Posts: 5

    Tinkerer

    Can I ask one more question. What should I do next if it succeeds or fails.

    Thank you.

  • Puraw
    Puraw ACE, Member Posts: 12,846 Trailblazer

    The restoring to factory defaults by Acer Services will not fail unless they find broken hardware like a HDD/SSD, in that case Acer Services will contact you first with a cost estimate to replace the item that you may have to pay in advance. I think they will reset the BIOS and load the OEM software, Windows and drivers without any issues.

  • sushwandhar
    sushwandhar Member Posts: 3 New User

    I am also facing the same issue my laptop was working completely fine few hours ago and suddenly when turned ON again I got error showing "BI IntetializeLibrary failed 0x0000185" like this i tried entering into bios menu but I am unable to do anything

  • sushwandhar
    sushwandhar Member Posts: 3 New User